Untitled design 14 510x510 - Amerex HV-Series

Copy of Untitled 2000 x 2000 px 87 510x510 - Amerex HV-Series

Amerex HV-Series

Name: Amerex HV-Series
Brand: Amerex Instruments
SKU: 8021-10-0001
Availability: InStock

$8,990.00 – $18,300.00

SKU: 8021-10-0001 Category: Autoclave Sterilizers Brand: Amerex Instruments

Not sure which configuration is right for your application? Schedule a free consultation with our technical consultants today!

Schedule a consultation

Product Description

Space-saving design with lid opening upward.

Programmable auto-start for initiating a cycle up to 1 week later.

Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C.

Automatic air purging by a microprocessor prevents over-pressurization during a cycle.

One-touch lever to easily open and close chamber lid.

Programmable rate of steam exhaust.

Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly.

In-process display shows status and progress of sterilization cycle.

Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature.

Unique accessory: Floating sensor to monitor load temperature.

Sterilization timer is activated only when load temperature reaches set temperature.

Agar melting mode for rapidly melting agar and maintaining it at liquid temperature, or for a hot and faster start-up

Memory backup system retains user-programmed parameters even in case of power failure.

Technical Specifications

HV-25 AND HV-50 SPECIFICATIONS

MODEL	HV-25	HV-50
TEMPERATURE
Operating Range	105ºC to 126ºC	105ºC to 135ºC
Display Range	128ºC	137ºC
Warming Range	45ºC to 60ºC
Agar Dissolution	Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC (programmable for up to 20 hours to prevent coagulation)
GAUGE PRESSURE
Operating Range	3 to 22 psi gauge (0.02 to 148MPa)	3 to 30 psi (0.02 to 0.206MPa)
Maximum Allowable	27 psi (0.186MPa)	38 psi (0.26MPa)
TIMER
Sterilization	1 to 250 minutes
Delayed Auto-start	Program autoclave to start 1 minute to 7 days later
DIMENSIONS
Overall (W x D x H)	19.0″ x 18.0″ x 37.4″ (48 cm x 46 cm x 95 cm)	20″ x 21″ x 41″ (51 cm x 53 cm x 104 cm)
Chamber (Diameter x Height)	25 liters 9.4″ x 21.6″ (24 cm x 55 cm)	50 liters 11.8″ x 28.0″ (30 cm x 71 cm)
SAFETY DEVICES	Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker
PROGRAMS
1. For agar	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion
2. For liquids	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion
3. For solids	Heating -> Sterilization -> Exhaust (fast, default) -> Completion
4. For melting agar or for faster start-up	Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion
ACCESSORIES
Stainless steel	Mesh wire baskets, buckets (pails), and round test tube racks
Factory or field installed	Floating (load) sensor, digital printer, and data logger
POWER
Source	120V, 50/60 Hz (220V/240V available)
Consumption	1500 watts (1500VA)	2000 watts (2000VA)
SHIPPING WEIGHT	160 lb (73 kg)	180 lb (82 kg)

WARRANTY: Autoclaves are protected by a 12-month warranty.

HV-85 AND HV-110 SPECIFICATIONS

MODEL	HV-85	HV-110
TEMPERATURE
Operating Range	105ºC to 135ºC
Display Range	137ºC
Warming Range	45ºC to 60ºC
Agar Dissolution	Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC (programmable for up to 20 hours to prevent coagulations)
GAUGE PRESSURE
Operating Range	3 to 30 psi (0.021 to 0.206MPa)
Maximum Allowable	38 psi ( 0.26MPa)
TIMER
Sterilization	1 to 250 minutes
Delayed Auto-start	Program autoclave to start 1 minute to 7 days later
DIMENSIONS
Overall (W x D x H)	26.0″ x 25.6″ x 39.4″ (66 cm x 65 cm x 100 cm)	26.0″ x 25.6″ x 46.5″ (66 cm x 65 cm x 118 cm)
Chamber (Diameter x Height)	85 liters 16.5″ x 24.2″ (42.0 cm x 61.5 cm)	110 liters 16.5″ x 31.3″ (42.0 cm x 79.5 cm)
SAFETY DEVICES	Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker
PROGRAMS
1. For agar	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion
2. For liquids	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion
3. For solids	Heating -> Sterilization -> Exhaust (fast, default) -> Completion
4. For melting agar or for faster start-up	Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion
ACCESSORIES
Stainless steel	Mesh wire baskets, buckets (pails), and round test tube rack
Factory or field installed	Floating (load) sensor, digital printer, and data logger
POWER
Source	208V/220V/240V, 50/60 Hz, single phase
Consumption	3000 watts (3000VA)	4000 watts (4000VA)
SHIPPING WEIGHT	282 lb (128 kg)	308 lb (140 kg)

WARRANTY: Autoclaves are protected by a 12-month warranty.

Technical Specifications

HV-25 AND HV-50 SPECIFICATIONS

MODEL	HV-25	HV-50
TEMPERATURE
Operating Range	105ºC to 126ºC	105ºC to 135ºC
Display Range	128ºC	137ºC
Warming Range	45ºC to 60ºC
Agar Dissolution	Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC (programmable for up to 20 hours to prevent coagulation)
GAUGE PRESSURE
Operating Range	3 to 22 psi gauge (0.02 to 148MPa)	3 to 30 psi (0.02 to 0.206MPa)
Maximum Allowable	27 psi (0.186MPa)	38 psi (0.26MPa)
TIMER
Sterilization	1 to 250 minutes
Delayed Auto-start	Program autoclave to start 1 minute to 7 days later
DIMENSIONS
Overall (W x D x H)	19.0" x 18.0" x 37.4" (48 cm x 46 cm x 95 cm)	20" x 21" x 41" (51 cm x 53 cm x 104 cm)
Chamber (Diameter x Height)	25 liters 9.4" x 21.6" (24 cm x 55 cm)	50 liters 11.8" x 28.0" (30 cm x 71 cm)
SAFETY DEVICES	Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker
PROGRAMS
1. For agar	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion
2. For liquids	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion
3. For solids	Heating -> Sterilization -> Exhaust (fast, default) -> Completion
4. For melting agar or for faster start-up	Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion
ACCESSORIES
Stainless steel	Mesh wire baskets, buckets (pails), and round test tube racks
Factory or field installed	Floating (load) sensor, digital printer, and data logger
POWER
Source	120V, 50/60 Hz (220V/240V available)
Consumption	1500 watts (1500VA)	2000 watts (2000VA)
SHIPPING WEIGHT	160 lb (73 kg)	180 lb (82 kg)

WARRANTY: Autoclaves are protected by a 12-month warranty.

HV-85 AND HV-110 SPECIFICATIONS

MODEL	HV-85	HV-110
TEMPERATURE
Operating Range	105ºC to 135ºC
Display Range	137ºC
Warming Range	45ºC to 60ºC
Agar Dissolution	Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC (programmable for up to 20 hours to prevent coagulations)
GAUGE PRESSURE
Operating Range	3 to 30 psi (0.021 to 0.206MPa)
Maximum Allowable	38 psi ( 0.26MPa)
TIMER
Sterilization	1 to 250 minutes
Delayed Auto-start	Program autoclave to start 1 minute to 7 days later
DIMENSIONS
Overall (W x D x H)	26.0" x 25.6" x 39.4" (66 cm x 65 cm x 100 cm)	26.0" x 25.6" x 46.5" (66 cm x 65 cm x 118 cm)
Chamber (Diameter x Height)	85 liters 16.5" x 24.2" (42.0 cm x 61.5 cm)	110 liters 16.5" x 31.3" (42.0 cm x 79.5 cm)
SAFETY DEVICES	Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker
PROGRAMS
1. For agar	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion
2. For liquids	Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion
3. For solids	Heating -> Sterilization -> Exhaust (fast, default) -> Completion
4. For melting agar or for faster start-up	Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion
ACCESSORIES
Stainless steel	Mesh wire baskets, buckets (pails), and round test tube rack
Factory or field installed	Floating (load) sensor, digital printer, and data logger
POWER
Source	208V/220V/240V, 50/60 Hz, single phase
Consumption	3000 watts (3000VA)	4000 watts (4000VA)
SHIPPING WEIGHT	282 lb (128 kg)	308 lb (140 kg)

WARRANTY: Autoclaves are protected by a 12-month warranty.

Replacement Parts & Accessories

To view available parts for this instrument and instruments like it, click here.

Our parts and accessories inventory is constantly changing. Don't see what you're looking for? Give us a call, we'll be happy to help.

Service

Service Agreements	Silver	Gold	First Class Ship & Fix	Economy Ship & Fix
Preventative Maintenance Visit	1 Preventative Maintenance Visit per Year	1 Preventative Maintenance Visit per Year
Parts Covered
Labor Covered
Unlimited Remote Tech Support
Depot Repair
Depot Preventative Maintenance

Reviews

Untitled 1000 × 100 px 800 × 100 px 1400x175 - Amerex HV-Series

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 1 1 - Amerex HV-Series

GMI was a very professional business to work with. Shipping was quick and easy. Technical Support was quick to respond. I would highly recommend GMI for all your laboratory equipment needs.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 1 - Amerex HV-Series

Top notch customer service and vast selection of inventory. Highly recommend.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 2 - Amerex HV-Series

Great costumer service, over delivered and got everything I needed ahead of time.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 3 - Amerex HV-Series

Very professional transaction. Would definitely buy from GMI again.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 5 - Amerex HV-Series

GMI were very easy and nice to work with, they quickly got in touch with me regarding a specific piece of equipment and were able to secure several options for me to choose from, letting me get to my experiments with minimal turnaround time.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 4 - Amerex HV-Series

As a small business owner that depends on specific laboratory equipment to operate, GMI delivered on every front.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 6 - Amerex HV-Series

We bought a Leitz 1512 microtome for our lab from this company and the product is great. Costumer service is fantastic. We are happy with our purchase and highly recommend GMI to everybody.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 7 - Amerex HV-Series

A+ supplier. Very helpful and materials received new and ready for use right out of the box.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 8 - Amerex HV-Series

Great experience purchasing equipment from GMI in the past and will certainly be going with them for potential future purchases! Quick responses, understood my needs and great prices!

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 9 - Amerex HV-Series

I have bought several pieces of equipment from GMI. In each case, my experience was fantastic. The salesperson made sure that he understood my needs and offered alternatives. The equipment arrived quickly and in great condition. I will use GMI in the future.

Untitled 1000 × 100 px 800 × 100 px 200 × 100 px 300 × 100 px 10 - Amerex HV-Series

They are experts in the field - I wouldn't trust our business with any one else.

I have worked with GMI for the past 3 years for service contracts on laboratory instruments and we are very satisfied with the level of service we have received. I would recommend them to anyone who needs to use their services.

Amerex HV-Series

Not sure which configuration is right for your application? Schedule a free consultation with our technical consultants today!

Product Description

Technical Specifications

HV-25 AND HV-50 SPECIFICATIONS

HV-85 AND HV-110 SPECIFICATIONS

Technical Specifications

HV-25 AND HV-50 SPECIFICATIONS

HV-85 AND HV-110 SPECIFICATIONS

Replacement Parts & Accessories

Service

Service Agreements

Silver

Gold

First Class Ship & Fix

Economy Ship & Fix

Reviews

About

Shop

Information

Newsletter

Amerex HV-Series

Not sure which configuration is right for your application? Schedule a free consultation with our technical consultants today!

Product Description

Technical Specifications

HV-25 AND HV-50 SPECIFICATIONS

HV-85 AND HV-110 SPECIFICATIONS

Technical Specifications

HV-25 AND HV-50 SPECIFICATIONS

HV-85 AND HV-110 SPECIFICATIONS

Replacement Parts & Accessories

Service

Service Agreements

Silver

Gold

First Class Ship & Fix

Economy Ship & Fix

Reviews

Related products

Shop

Information

Request Quote

Login