Product Description
Top loading design is ideal for the sterilization of media and other liquids in tall flasks and bottles.
Deep chamber for accommodating fermentors and bioreactors.
Space-saving, stand-alone unit occupies minimal floor space and can fit conveniently into many locations in the laboratory.
Full-count sterilization guarantees sterilization at the preset temperature and time. Timer pauses if chamber temperature falls 1ºC below the preset temperature.
Liquid cycles with slow exhaust or natural cooling for liquids and solids without drying.
Drying cycle for glassware and other solid loads.
Additional drying cycle without re-sterilization.
Micro-processor controlled for precise sterilization.
Internal steam generator uses purified water to generate pure steam.
Audio/visual alarms and on-board diagnostics for rapid repair.
HA-300MD size: 50 liters, 11.8″ D, 26.4″ H.
Technical Specifications
| TEMPERATURE | |
| Operating Range |
105ºC to 126ºC
|
| Display Range |
5ºC to 129ºC
|
| GAUGE PRESSURE | |
| Operating Range (gauge) |
3 to 30 psi (gauge), 0.021 to 0.21MPa
|
| Maximum Allowable |
38 psi (gauge), 0.26MPa
|
| TIMER | |
| Sterilization |
1 to 999 minutes
|
| Drying |
1 to 120 minutes
|
| DIMENSIONS | |
| Overall (W x D x H) |
17.3″ x 20.5″ x 42.1″ in (44 x 52 x 107 cm)
|
| Chamber (Diameter x Height) |
50 liter 11.8″ x 26.4″ (30 cm x 67 cm)
|
| SAFETY DEVICES |
Over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff,
mechanical pressure relief valve, over-current detector and circuit breaker |
| PROGRAMS | |
| 1. For solids with drying |
Sterilization -> Manual Steam/Water Exhaust -> Drying -> Completion
|
| 2. For solids w/o drying |
Sterilization -> Auto Steam Exhaust -> Completion
|
| 3. For liquids |
Sterilization -> Natural Cooling -> Completion
|
| 4. For additional drying |
Drying -> Completion
|
| ACCESSORIES | |
| Stainless steel |
Mesh wire baskets, buckets (pails), and round test tube rack
|
| Factory or field installed |
Data logger
|
| POWER | |
| Source |
120V, 50/60 Hz, single phase (220V available on request)
|
| Consumption |
2000 watts (2000 VA)
|
| SHIPPING WEIGHT |
180 lb (82 kg)
|
WARRANTY: Autoclaves are protected by a 12-month warranty.










Reviews
There are no reviews yet.