Product Description

Helpful Links:

• Thermo TRACE GC Ultra Standard Operating Proceedures
• Thermo TRACE GC Ultra Site Preparation and Installation Manual
• Thermo TRACE GC Product Brochure
• Thermo TRACE GC Operating Manual
• Thermo TRACE GC Specifications

The TRACE GC Ultra is built around the recognized quality, reliability and ruggedness of the established TRACE GC. Ultra performance, reliability, and usability make this a must-have GC for any laboratory. Automated features result in a tremendous increase in sample throughput, with analyses performed up to 30 times faster than before, without compromises in precision.

Product detail

The new Ultra platform incorporates innovative solutions, such as the new Ultra Fast and Large Volume splitless techniques, delivering unprecedented performance.

Ultra in speed of analysis

Featuring a linear heating rate of up to 1200 °C per minute, the TRACE GC Ultra is able to dramatically decrease sample run times in a wide range of GC applications from crude oils, pesticides and hydrocarbons determination, to drug screening and food and flavors characterization. Combined with conventional GC or MS detectors, this technique enormously increases lab productivity without compromising analytical resolution, precision or reliability.

Technical Specifications

• Programmability: 7 Ramps/8 Plateaus.
• Temperature range: few degrees above ambient to 450 °C.
• Maximum Temperature ramp: 120 °C/min.
• Typical heat-up: from 50 °C to 450 °C in 420 seconds.
• Typical cool down: 450 °C to 50 °C in 250 seconds.
• Sub-ambient: -99 °C with liquid N2, -55 °C with CO2 options.
• Temperature range: 50-400 °C
• Heating rate: Up to 14.5 °C/sec (870°C/min).
• Programmability: 3 ramps/4 plateaus. Air-cooled down to few degrees above ambient temperature.
• Sub-ambient: -50 °C with liquid N2 , -30°C with CO2 options.
• Non-Vaporizing Inlets: Cold, On-column Septumless injector. No heating of the injector is required. Suitable for manual and automated operations.
  Cryogenic coolant not required.