- Automatic rotor identification (PAT)
This function automatically adjust optimized running condition based on the rotor automatically identified by compensating for air friction and implement temperature control etc..
- Automatic rotor cover detector (PAT)
It detects rotor cover status by ultrasonic sensor on the door. It prevents from unexpected accident caused by without rotor cover in advance.
- Pre-cool function (PAT)
This function maintains temperature inside rotor chamber at 15ºC with preventing from icing, in order to reduce electricity consumption and reach target temperature faster, when the rotor is not sent on the drive shaft. When the rotor is set on the drive shaft, refrigerator controls the temperature inside the rotor chamber at the set temperature.
- Zoom function (PAT)
Display of running speed and time is enlarged on the screen in order to find the operating status from a distance. Screen is switched from “Run Screen” to Zoom Display” automatically at 20 sec. after reaching the set speed.
- User administration
You can register up to 40 users into the memory. You can set access level and PIN of each user. There are two access levels, “Administration” or “User”. “Administrator” can access full function, while “User” cannot access administrator function when the user lockout function is on.
- User Lockout Function
In case the user lockout function is enabled, only registered user can login the system by entering registered 4 digit PIN. It is useful function to control user access based on the groups or laboratories.
USB port is equipped as a standard specification. The system records up to 100 operating histories in its memory. The operating data can be output in CSV format thought the USB port.
Optional LAN board is also available. You can link CR22N to your PC through Ethernet or internet. Optional software “himac LogManager Ver.4.0 (network edition)” can be installed in your PC and operating history and data of CR22N can be easily managed by your PC.
- himac LogManager Ver.4.0 for Windows® (Network Edition) – Optional log management software
himac LogManager Ver.4.0 for Windows® (Network Edition) is useful and covenant software to manage real time operating log of himac CP-NX series, CP-WX series, CS150NX, CS150FNX and CR22N. Maximum 16 units of abovementioned centrifuges can be registered to the software at once. As data communication between the centrifuges and PC is done via LAN, so there is no distance limitation to establish a network. You can easily establish the network configuration and relocation with commercially available LAN devices. (Optional LAN board is required for the centrifuges.) It means you can manage the operation log at the different location from the installation sites of the centrifuges.
The software is real-time log management software; recording period is selectable from 10 seconds to 5 minutes interval. Of course, the software supports U.S. FDA 21 CFR Part 11, following functions are available;
- • Digital signature
• Audit trail
• Encrypted data files etc.
Windows® 7 and Windows® 8
Windows®, Windows® 7 and Windows® 8 are registered trademark of Microsoft Corporation in the United States and other countries.