The BWB XP Flame Photometer Exclusively From GMI!
Our award winning 5-channel instrument!
Ready to use straight out of the box — Just add gas!
The BWB XP is the first and only 5 channel flame photometer with simultaneous detection and display of all 5 elements.
Not sure what model is right for you? Download the Product Comparison sheet below!
With clean lines and contemporary bright colour schemes, the XP looks exceptionally modern and will fit into any laboratory. The instrument has a large LCD display, which can be viewed easily from any angle.
Simultaneous detection and display of all 5 atoms of interest
Intuitive user interface for true ease of use – Display prompts step by step operation
Built-in Air Compressor
Solutions and labware included
5 user selectable units of measure & data sharing via PC Link via USB
1-Year factory warranty included – Extended 5-Year Warranty Available
2 – 3.5ml/min
Silicone and Tygon®
Required desk space for Instrument
50cm (H) x 45cm (W) x 45cm (D)*
For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.
XP Flame Photometer
51cm (H) x 38cm (W) x 41cm (D)
(20in x 14in x 16in)
62cm (H) x 55cm (W) x 47cm (D)
(24in x 22in x 19in)
XP Flame Photometer – 15.3kg (33.7lbs)
Shipping – 25kg (55.1 lbs)
Single point calibration
Na 0.1 – 60ppm
K 0.05 – 100ppm
Li 0.05 – 50ppm
Ca 1.0 – 100ppm
Ba 1.6 – 100ppm
Multi Point Calibration
Na 0.1 – 1000ppm
K 0.05 – 1000ppm
Li 0.05 – 1000ppm
Ca 1.0 – 1000ppm
Ba 5.0 – 3000ppm
<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).
Na/K/Li = <0.5% to each other when equal in concentration at <100ppm
Limit of detection (LOD) and
limit of quantification (LOQ)
Na – 0.03ppm Na – 0.1ppm
K – 0.02ppm K – 0.05ppm
Li – 0.02ppm Li – 0.05ppm
Ca – 0.3ppm Ca – 1ppm
Ba – 1.6ppm Ba – 5.0ppm
Time to stability
Less than 15 seconds after sample is introduced into the flame.
Simultaneous measurement of Na, K, Li, Ca, Ba
0-2.5 volt output (based on sample concentration linked to element of users choice)
Optional 4-20mA output in place of the above
Optional integrated printer
.csv and .pdf generated reports and files via FP-PC software
Recommended minimum warm up time based on ambient temperature
21ºC – 40 minutes
100V – 250V AC at 50 or 60Hz automatically selecting
Propane, Butane or Natural Gas* regulated to 19Bar. Flow rate of 0.4l/min
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.
LCD, four line, alpha numeric, back lit.
Our metal casework provides a sturdy portable instrument and enables future recycling opportunities. ROHS compliant components and materials are used wherever possible.
The BWB Carbon Footprint is exceptionally low, in keeping with corporate objectives of being a responsible manufacturer.
Unlike other manufacturers who charge extra for vital accessories, BWB include everything required to use the product straight out of the box. Just add Gas!! (Propane, LPG or butane).
We also provide as standard, data sharing via USB from the BWB XP to your PC. This ties the output of the BWB Flame Emission Spectrometer (FES) to the Internet or your company intranet systems and facilitates Distributed Control which is vital for Multi-National companies, Universities and various Governmental agencies.
The BWB XP is the greatest advance in flame photometry for 30 years!