No products in the cart.
GMI was a very professional business to work with. Shipping was quick and easy. Technical Support was quick to respond. I would highly recommend GMI for all your laboratory equipment needs.
BlueShadow Pump 80P – High-pressure dosing pump with 1000 ml/min titanium pump head – APD60NB
Not sure which configuration is right for your application? Schedule a free consultation with our technical consultants today!
Schedule a consultationProduct Description
- Max. flow rate 1000 ml/min
- Flow rate range 1-1000ml
- Flow rate increment 0.1 ml/min
- Maximum delivery pressure [psi] 1088 psi
- Maximum delivery pressure [MPa] 7,5 MPa
- Maximum delivery pressure [bar] 75 bar
- Pump head materials Titanium
- Maximum viscosity 1000 cP
- Liquid temperature range 4−60 °C (39.2−140 °F)
- Gradient Isocratic
- 2-Year Warranty Included
The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.
General information
| Max. flow rate | 1000 ml/min |
|---|---|
| Flow rate range | 1-1000ml |
| Flow rate increment | 0.1 ml/min |
| Maximum delivery pressure [psi] | 1088 psi |
| Maximum delivery pressure [MPa] | 7,5 MPa |
| Maximum delivery pressure [bar] | 75 bar |
| Pump head materials | Titanium |
| Maximum viscosity | 1000 cP |
| Liquid temperature range | 4−60 °C (39.2−140 °F) |
| Gradient | Isocratic |
| Leak management | – |
| Wetted materials | Titanium, GFP (graphite fiber reinforced PTFE), ruby, sapphire, aluminum oxide (Al2O3), FFKM |
| Pump features | RFID for automatic pump head detection, Active pulsation compensation, Standalone control and programming, Integrated pressure sensor, Piston seal wash |
| Note | Pressure sensor membrane made of stainless steel; limited wetting in fluidic path |
Detailed information
| Best working conditions | 10-800 ml/min |
|---|---|
| Continuous working conditions | 10-400 ml/min |
| Flow rate accuracy | ± 2 % |
| Flow rate accuracy conditions | measured at 5 – 50 % of flow range using ethanol/water 10:90 |
| Flow rate precision | < 0.1 % RSD |
| Flow rate precision conditions | measured at 5 – 50 % of flow range using ethanol/water 10:90 |
| HPG: gradient accuracy | ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer) |
| HPG: gradient precision | 1 % RSD, based on retention time at constant room temperature |
| LPG: gradient accuracy | ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer) |
| LPG: gradient precision | 2 % RSD, based on retention time at constant room |
| Active piston seal wash | + |
| Piston seal washing | + |
| Pump Outlet thread | Female UNF 10-32 (coned) |
| Pump head inlet (standard) | M8 x 1 (flat bottom) |
| Pump head outlet (standard) | M8 x 1 (coned) |
Communication
| Interfaces | keypad; LAN; RS-232; pin header connectors (events control and remote control) |
|---|---|
| Control | stand-alone via keypad; digital via LAN or RS-232; analog via remote control pin header connector |
| Inputs | flow rate |
| Outputs | pressure; 8 event outputs (TTL, OC, relays) |
| Analog inputs | 0-10 V |
| Analog outputs | 1, 2 or 5 V |
General
| Power supply | 100 – 240 V, 50 – 60 Hz |
|---|---|
| Dimensions | 242 x 191 x 407 mm (W × H × D) |
| Weight | 13.2 kg |
| Leak sensor | no |
| Ambient conditions | temperature range: 10–40 °C; 50–104 °F air humidity: below 90 % humidity (non condensing) |
| Note | Acessory Kit includes PTFE tubing and PETP bushing/sealing ring for standard applications. For applications with aggressive solvents, PEEK or stainless steel parts are available. |
Replacement Parts & Accessories
To view available parts for this instrument and instruments like it, click here.
Our parts and accessories inventory is constantly changing. Don't see what you're looking for? Give us a call, we'll be happy to help.
Service
Service Agreements |
Silver |
Gold |
First Class Ship & Fix |
Economy Ship & Fix |
| Preventative Maintenance Visit | 1 Preventative Maintenance Visit per Year | 1 Preventative Maintenance Visit per Year | ||
| Parts Covered |  |
|
||
| Labor Covered | |
|
|
|
| Unlimited Remote Tech Support | |
|
|
|
| Depot Repair | |
|
||
| Depot Preventative Maintenance | |
Reviews
