Product Description
Rapid heating and cooling throughout the entire temperature range.
Performance
- Temperature range.
– RW3-35 models from -35℃ to 150℃.
– RW3-25 models from -25℃ to 150℃. - Microprocessor PID control.
- Three point temperature calibration / Automatic tuning / Automatic run.
- Suitable for both internal and external bath environments due to reduced turbulence by using five-speed adjustable pump and built-in cooling coil.
(1 to 3 steps of the pump for internal circulation and 4 to 5 steps for external circulation)
Pump Step | 1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|---|
Max. pressure (psi) | 0.5 | 1.1 | 2.4 | 4.9 | 5.9 |
Max. flow rate (L/min) | 5.6 | 8.0 | 12.8 | 18.8 | 28.0 |
※ Bath fluid: water at the normal temperature.
Convenience
- Bright VFD display with quick adjustable dial knob. (0.1℃resolution)
- Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
- Convenient memory function of up to three frequently set temperature.
- Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve.
- Detachable condenser air-filter for easy maintenance of refrigerating efficiency.
- CFC-free refrigerant (R-507, R-404A) and a double service valve for leakage prevention.
- Quick-release front grill for easy cleaning of the condenser.
- RS-232 / USB interface for external control and data collection.
- Side handles enables convenience handling and transport
- Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (when purchased LC GreenBox)

Easy maintenance of condenser by removable gridded vent

Condenser air-filter for refrigerating efficiency
Safety
- Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
- Complete safety protection system with warning alarms.
– Low fluid level and dry-running, over-temperature, over-current. - Keypad lock function prevents accidental changes during operation.
Specifications
for temperature range from -25℃ to 150℃
Model | RW3-0525 | RW3-1025 | RW3-2025 | RW3-3025 | |
---|---|---|---|---|---|
Bath volume (L / cu ft) | 5 / 0.2 | 10 / 0.4 | 20 / 0.7 | 30 / 1.1 | |
Temperature | Working temperature range (℃ / ℉) | -25 to 150 / -13 to 302 | |||
Temperature stability 1) (±℃ / ℉) | 0.05 / 0.09 | ||||
Cooling capacity 2) (bath fluid: ethanol) |
at -20℃ (-4℉), W | 140 | 180 | 310 | 465 |
at 0℃ (+32℉), W | 270 | 360 | 610 | 700 | |
at +20℃ (+68℉), W | 400 | 560 | 850 | 980 | |
Refrigerator | 1/3 LBP, R-507 | 1/3 LBP, R-507 | 1/2 LBP, R-404A | 3/4 LBP, R-404A | |
Pump(bath fluid: water) | Max. pressure | 5.9 PSI (406.8 millibar) | |||
Max. flow rate | 7.4 gallons / minute (28 liters / minute) | ||||
Dimension | Bath opening / depth(W×L, D) (mm / inch) |
150×99, 160/ 5.9×3.9, 6.3 |
211×154, 180/ 8.3×6.1, 7.1 |
290×214, 200/ 11.4×8.4, 7.9 |
300×264, 230/ 11.8×10.4, 9 |
Exterior(W×L×H) (mm / inch) | 308x480x733/ 12.1×18.9×28.9 |
366x532x780/ 14.4×20.9×30.7 |
386x602x825/ 15.2×23.7×32.5 |
446x662x895/ 17.6×26.1×35.2 |
|
Net weight (kg / lbs) | 38 / 83.8 | 44 / 97 | 60 / 132.2 | 67 / 147.7 | |
Electrical requirements (230V, 60Hz) | 11A | 11A | 12.5A | 13.5A | |
Cat. No. | AAH57041K | AAH57051K | AAH57062K | AAH57071K | |
Electrical requirements (230V, 50Hz) | 11A | 11A | 12.5A | 13.5A | |
Cat. No. | AAH57042K | AAH57052K | AAH57062K | AAH57072K | |
Electrical requirements (120V, 60Hz) | 12.6A | 12.6A | |||
Cat. No. | AAH57043U | AAH57053U | – | – |
for temperature range from -35℃ to 150℃
Model | RW3-0535 | RW3-1035 | RW3-2035 | RW3-3035 | |
---|---|---|---|---|---|
Bath volume (L / cu ft) | 5 / 0.2 | 10 / 0.4 | 20 / 0.7 | 30 / 1.1 | |
Temperature | Working temperature range (℃ / ℉) | -35 to 150 / -31 to 302 | |||
Temperature stability 1) (±℃ / ℉) | 0.05 / 0.09 | ||||
Cooling capacity 2) (bath fluid: ethanol) |
at -20℃ (-4℉), W | 140 | 180 | 310 | 465 |
at 0℃ (+32℉), W | 270 | 360 | 610 | 700 | |
at +20℃ (+68℉), W | 400 | 560 | 850 | 980 | |
Refrigerator | 1/2 LBP, R-404A | 1/2 LBP, R-404A | 3/4 LBP, R-404A | 1 LBP, R-404A | |
Pump(bath fluid: water) | Max. pressure | 5.9 PSI (406.8 millibar) | |||
Max. flow rate | 7.4 gallons / minute (28 liters / minute) | ||||
Dimension | Bath opening / depth(W×L, D) (mm / inch) |
150×99, 160/ 5.9×3.9, 6.3 |
211×154, 180/ 8.3×6.1, 7.1 |
290×214, 200/ 11.4×8.4, 7.9 |
300×264, 230/ 11.8×10.4, 9 |
Exterior(W×L×H) (mm / inch) | 308x480x733/ 12.1×18.9×28.9 |
366x532x780/ 14.4×20.9×30.7 |
386x602x825/ 15.2×23.7×32.5 |
446x662x895/ 17.6×26.1×35.2 |
|
Net weight (kg / lbs) | 38 / 83.8 | 44 / 97 | 60 / 132.2 | 67 / 147.7 | |
Electrical requirements (230V, 60Hz) | 12.5A | 12.5A | 13.5A | 14.5A | |
Cat. No. | AAH57141K | AAH57151K | AAH57161K | AAH57171K | |
Electrical requirements (230V, 50Hz) | 12.5A | 12.5A | 13.5A | 14.5A | |
Cat. No. | AAH57142K | AAH57152K | AAH57162K | AAH57172K |
※ Technical data (according to DIN 12876)
※ In case using silicon oil, you need to exchange other material tube (inlet and out late part), such as copper tube, a teflon tube instead of a silicon tube in fitting.
1) Technical data according to DIN 12876. (bath fluid : ethanol at -10℃)
2) The cooling capacity is measured under 230V / 60Hz electrical condition.
Reviews
There are no reviews yet.