AZURA CM 2.1S, no flow cells
Not sure which configuration is right for your application? Schedule a free consultation with our technical consultants today!
Schedule a consultationProduct Description
Conductivity monitor with optional pH measurement
Main unit for parallel conductivity and pH monitoring
The AZURA CM 2.1S is a reliable conductivity monitor which is usually utilized in FPLC to follow salt gradients. By adding a pH sensor also pH values can be measured.
The contactless measurements of conductivity reduces the risk of carryover to a minimum and makes the device easy to maintain. The fully biocompatible flow cells cover a flow rate of up to 100 ml/min. Choose between ADG30GC and ADG30GD for a CM 2.1S with ready to measure flow cells for either 10 or 100 ml/min maximum flow.
Flow cell
| Flow cell type | Contactless conductivity flow cell |
|---|---|
| Biocompatible | Yes |
| Connection of flow cell | Female 10-32″ UNF or M8x1 thread (PEEK) – both included in shipment |
| Capillary connection | 1/16″ or 1/8″ – both included in shipment |
| Wetted materials | PEEK |
Detection
| Detector type | Conductivity monitor |
|---|---|
| Measurement accuracy | Conductivity: < 5% full scale value Temperature: ± 1.0°C pH: ± 0.5 pH (within 4 – 25°C) |
| Measurement precision | Conductivity: < 2% of full scale value or ≤ 5 mS/cm of higher values (measured within 0.1 – 300 mS/cm) pH: ± 0.2 pH (within 4 – 25°C) |
| Measurement range | 0.1 – 999 mS/cm |
| Linearity | ±1% full scale value |
| pH measurement | 2 – 12 |
| Maximum data rate | 5 Hz |
| Supported electrodes | All pH electrodes with BNC connector and a voltage output of maximal ± 500 mV |
Communication
| Analog outputs | 2 channels (conductivity and pH value – not active if remote controlled by software) DAC 18 bit |
|---|---|
| Digital outputs | LAN; RS-232 |
Technical parameters
| GLP | Electronic serial number |
|---|---|
| Display | LCD, 2 x 8 characters |
| Ambient conditions | Operating temperature: 4 – 40°C, 39,2 – 104 °F Relative humidity: below 90 %, non condensing |
General
| Power supply | 100 – 240 V, 50 – 60 Hz, max. 20 W |
|---|---|
| Dimensions | 121 x 129 x 187 mm (W x H x D) |
| Weight | 3.2 kg |
| Weight | 1600 oz |
|---|---|
| Dimensions | 40 × 48 × 48 in |
| Manufacturer | |
| Instrument Type |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.