No products in the cart.
GMI was a very professional business to work with. Shipping was quick and easy. Technical Support was quick to respond. I would highly recommend GMI for all your laboratory equipment needs.
Agilent 6100 Quadrupole LC/MS Systems
Not sure which configuration is right for your application? Schedule a free consultation with our technical consultants today!
Schedule a consultation Have One To Sell?Product Description
High-performance design features
• Orthogonal-flow sprayer with pneumatic nebulizer – enhances sensitivity across a wide range of LC conditions and reduces maintenance requirements.
• High-capacity solvent drying system – reduces chemical noise and permits the analysis of thermally-sensitive compounds through user control of gas flow rate and gas temperature.
• Dielectric platinum-plated capillary – enhances sensitivity, permits independent optimization of the spray chamber and ion optics, and allows dynamic optimization of in-source fragmentation.
• Air-cooled turbomolecular pump – provides fast startup and a small footprint, and eliminates the need for cooling water. Single, split-flow turbo pump enhances performance and increases reliability.
• Fraction collection capability – can monitor and trigger the collection of fractions based on mass, an analog signal input, or time. For mass-based determination, up to 16 m/z values can be monitored. Requires optional I/O Accessory Module.
Faster answers. Maximum confidence.
Best-in-class data quality in a space saving benchtop package. With upgradeable configurations to match your needs and budget, Agilent 6100 Series systems let you:
• Rapidly screen compounds and confirm molecular weights.
• Purify target compounds in complex mixtures.
• Quantitate target compounds.
• Positively identify impurities.
Unmatched analysis speed boosts productivity
• Faster acquisition speeds let you take full advantage of UHPLC separations.
• Ultra fast ion polarity switching gives you maximum information from a single injection—even with narrow LC peaks.
• Faster injection-to-injection cycle times let you run more samples per hour.
Advanced analytical capabilities increase confidence
• Even at scan speeds up to 10,000 u/sec, you get excellent spectral quality and accurate isotope ratios for confident ID and confirmation.
• Variable energy, in-source, collision induced dissociation (CID) provides valuable structural information.
• Multi-signal capability lets you analyze more compounds per run.
Simple, intuitive operation saves time and improves results
• Intuitive Agilent ChemStation software lets you set up and control both LC and MS from a single screen; integration with MassHunter software adds analytical power.
• Powerful Autotune feature eliminates the need for manual recalibration.
• Comprehensive automation capabilities allow walk-up sample submission and unattended operation.
6120 Single Quadrupole LC/MS System
Budget friendly and very easy
to use—with Agilent’s 1120
Compact LC, a perfect workhorse
addition for labs just getting
into LC/MS.
6130 Single Quadrupole LC/MS System
Flexible, high performance
solution, ideal for any
quantitation application, with
a mass range up to 3000 Da
and 1 pg sensitivity.
6150 Single Quadrupole LC/MS System
Unsurpassed data quality for
UHPLC and high-throughput
screening and qualitative
applications, with faster scan
speed (10K amu/sec) and the
power of Agilent Jet Stream
technology: maximum sensitivity
for quantitative applications.
Specifications
|
Mass Range |
6130 Quad: m/z 2 – 3000 |
|
Mass Accuracy |
± 0.13 u within the calibrated mass range in scan mode |
|
Mass Axis Stability |
The mass drift does not exceed the larger absolute value of ± 0.1 Da or ± 100 ppm of measured mass over a 12 hour period at constant temperature ± 3 degrees centrigrade. |
|
Scan Speed |
6130 Quad: 2500 u/s standard mode, 5250 u/s fast scan mode |
|
SIM Sensitivity |
• ESI at 400 µ/min or APCI at 1000 µ/min • Selected ion monitoring of m/z 609.3 • Positive ionization |
|
6130 and 6140 Quad: 1 pg reserpine, 100:1 RMS (20:1 peak-to-peak) |
|
|
Scan Sensitivity* |
• ESI at 400 µ/min or APCI at 1000 µ/min • Scan range m/z 100 – 650 • Scan speed 2500 u/s • Extracted ion at m/z 609.3 • Positive ionization |
|
6130 and 6140 Quad: 50 pg reserpine, 100:1 RMS (20:1 peak-topeak) |
|
|
Flow Rate |
ESI: Up to 1.0 ml/min water without a flow splitter APCI: Up to 1.5 ml/min water without a flow splitter |
|
Multisignal acquisition (6120, 6130 and 6140 Quad only) |
Ability to cycle through four acquisition modes on a scan-by-scan basis within a single run. Up to four analysis modes can be viewed in the software window and can be linked together to facilitate processing and analysis. Modes of operation: positive/negative polarity switching, variable fragmentor voltage selection, and concurrent SIM/scan. |
|
Operating Conditions |
Temperature range: 15 °C to 35 °C (59 °F to 95 °F) Relative humidity: less than 95 % (non-condensing) |
|
Dimensions** Height: 65 cm (26 in) Width: 39 cm (15 in) Depth: 75 cm (29 in W |
Height: 65 cm (26 in) Width: 39 cm (15 in) Depth: 75 cm (29 in Weight: 50 kg (110 pounds) **Approximate maximum cabinet dimensions with G1947A APCI source attached but without external mechanical pump. Height and width slightly less with G1948A ESI source. |
Replacement Parts & Accessories
To view available parts for this instrument and instruments like it, click here.
Our parts and accessories inventory is constantly changing. Don't see what you're looking for? Give us a call, we'll be happy to help.
Service
Service Agreements |
Silver |
Gold |
First Class Ship & Fix |
Economy Ship & Fix |
| Preventative Maintenance Visit | 1 Preventative Maintenance Visit per Year | 1 Preventative Maintenance Visit per Year | ||
| Parts Covered |  |
|
||
| Labor Covered | |
|
|
|
| Unlimited Remote Tech Support | |
|
|
|
| Depot Repair | |
|
||
| Depot Preventative Maintenance | |
Reviews
