17 cu. ft. Standard Manual Defrost Laboratory Freezer with Natural Refrigerants

Product Description

The Standard Hydrocarbon Manual Defrost Freezers take a large step forward in performance from past solid door general purpose units; offering a microprocessor temperature controller allowing for the precise temperature management necessary for critical samples and supplies.

Models are UL/C-UL or ETL Listed and are backed by a two year parts and labor warranty, plus additional three year compressor parts warranty.

Models utilize environmentally friendly, natural hydrocarbon (HC) refrigerants (not containing hydrofluorocarbons) vastly reduce global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines.

Details

• 17 CU. FT. CAPACITY
• ONE SOLID SWING DOOR, RIGHT HINGED
• SIX FIXED SHELVES
• KEYED DOOR LOCK
• MAGNETIC DOOR GASKET FOR POSITIVE SEAL
• LEVELING LEGS
• PROBE ACCESS PORT (3/8″)
• POWDER COAT EXTERIOR
• HIGH DENSITY URETHANE FOAM CABINET AND DOOR INSULATION
• NATURAL, HYDROCARBON REFRIGERANT (R290)
• TWO YEAR PARTS AND LABOR WARRANTY, PLUS ADDITIONAL THREE YEAR COMPRESSOR PARTS WARRANTY

Specifications

• EXTERIOR DIMENSIONS:30 3/4″ W X 28 5/8” D X 67 3/4″H NOTE: THIS UNIT MUST HAVE 4” CLEARANCE ON SIDES AND BACK FOR ADEQUATE VENTILATION
• MANUAL DEFROST
• 115V, 60 HZ, 6 AMPS, ½ HP
• ETL LISTED
• SHIPPING WEIGHT: 220 LBS.

Temp Controller

• MICROPROCESSOR TEMPERATURE CONTROLLER
• DIGITAL TEMPERATURE DISPLAY
• AUDIBLE AND VISUAL HIGH AND LOW TEMPERATURE ALARMS
• REMOTE ALARM CONTACTS
• 2 PROBES; 1 IN AIR AND 1 IN GLYCOL BOTTLE
• ADJUSTABLE OPERATING TEMPERATURE RANGE:-15°C – -25°C