Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!



  • Quaternary analytical HPLC pump offers wide range of flow rates (0.001-10 ml/min)
  • Completely metal-free design
  • Integrated degasser module
  • Pressure sensor with integrated and replaceable AZURA inline filter
  • Solvent selection valves for two solvents per channel

For more information or to place an offline order call 1-800-745-2710


The KNAUER AZURA pump P 6.1L uses technology to overcome the challenges of pumping LC solvents at high pressure and high flow rates. This pump is designed to fulfill the needs for low pressure mixing tasks.

This pump has a complete metal free design for biocompatible applications or ion chromatography.The pump can deliver flow in the range of 0.001 – 10 mL/min at pressures up to 400 bar. The AZURA quaternary pump contains one high pressure pump (400 bar) and an integrated LPG mixing block with a 4 × 2-channel inlet solvent selection valve and the new developed AZURA mixer, a low-volume mixing device.

The integrated degasser and AZURA inline filter are completing the analytical AZURA HPLC pump and turn this pump into a working horse in the lab.

Additional Features:

  • AZURA mixer for highest mixing efficiency with lowest delay volumes
  • Flexible 1/16“ capillaries
  • Pump version for biocompatible applications with a metal free design available
  • Integrated compressibility compensation
  • Integrated leak management
  • Constant pressure operation mode
Pump typequaternary HPLC pump with degasser
Solvent delivery
Pump head 10 ml/min
Pulsation compensation active pressure and pulsation compensation
Pump head materials ceramic
Maximum delivery pressure 40 MPa (400 bar, 5800 psi)
Flow rate range 0.001 - 10 ml/min
0.02 - 10 ml/min (recommended)
Flow rate increment 0.001 ml/min
Flow rate accuracy ± 1%, measured at 5 - 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD based on retention time at constant room temperature
Pulsation < 2 % amplitude (typically < 1.3 %) or 1 MPa (10 bar, 147 psi)
Gradient formation Low pressure quaternary mixing
Gradient range 0-100%
1-99% (recommended)
LPG: minimum increment 0.1%
LPG: gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer)
± 2 % (1 - 99 %, measured at 5 - 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Mixing volume 250 μl
Delay volume 350 μl
Piston seal washing standard
System protection soft start, Pmin and Pmax are programmable
Wetted materials graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminium oxide (Al2O3), zirconium oxide (ZrO2)
Degasser module
Degasser channels 4 channels, Teflon® AF
Degasser maximum flow rate 10 ml/min
Degassing method gas permeation through Teflon® AF amorphous fluoropolymer membrane
Degassing efficiency < 0.5 ppm dissolved O2 at 1 ml/min
Degassing chamber volume 480 µl volume per channel
Solvent applicability universal, with the exception of hydrochloric acid and halogenated hydrocarbons - in particular hexafluoroisopropanol (HFIP)
System protection soft start, Pmin and Pmax are programmable
Wetted materials PEEK, Tefzel®, Teflon® AF
Vacuum chamber polypropylene and stainless steel
Vacuum pump low hysteresis behavior
Control LAN; analog and event controlled
Analog inputs 0-10 V
Analog control input flow rate
Technical parameters
Ambient conditions temperature range: 10-40°C; 50-104°F
air humidity: below 90 % humidity (non condensing)
Leak sensor yes
Power supply voltage range: 100 - 240 V, 50 - 60 Hz
Dimensions 361 x 208.2 x 523 mm (W x H x D)
Weight 12.7 kg
Special features automatic adaption of LPG cycle time
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements

Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1 Service Visit
Service Visit 1PM
1 Service Visit
1 2
Parts and Labor    

Discounted Parts
Discounted Labor (As needed)

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.


Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.