Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Eppendorf Mastercycler Nexus Gradient Thermal Cycler

Eppendorf Mastercycler Nexus Gradient Thermal Cycler

  • Eppendorf Mastercycler Nexus Gradient Thermal Cycler
  • 1-20°C temperature control range
  • Gradient temperature range of 30-99°C
  • Features an aluminum thermal block
  • 96x 0.2 mL PCR tubes or 77x 0.5 mL PCR tubes or 1x 96 well PCR plate capacity
  • 4-99°C temperature control range

For more information or to place an offline order call 1-800-745-2710


Eppendorf Mastercycler Gradient Thermal Cycler

The Eppendorf Mastercycler nexus gradient is a gradient thermal cycler supporting over 12 columns. The nexus gradient has a gradient range of 4-99°C with an aluminum thermal block and 96x 0.2 ml PCR tubes or 77x 0.5 ml PCR tubes or 1x 96 well PCR plate capacity. With a 1-20°C temperature control range and a gradient temperature range of 30-99°C. The Mastercycler nexus gradient is a fast, safe gradient thermal cycler.

The Eppendorf Mastercycler nexus gradient uses peltier elements and triple circuit technology to heat the lid to a range of 37-110°C. The lid also features Eppendorf flex lid technology for ergonomic lid opening. Block homogeneity ranges from 20-72°C < ±0.3°C, 95°C < ±0.4°C with an accuracy of ≤ ±0.2°C.

The Eppendorf Mastercycler nexus thermal cycler has an approximate heating rate of 3°C per second and a cooling rate of 2°C and features USB, Ethernet and CAN in/out interfaces. All Eppendorf nexus thermal cyclers feature low power consumption using only 700W during operation.

Control up to three cyclers using either a nexus or nexus gradient as the control cycler, controlling up to two nexus eco cyclers.


Eppendorf Mastercycler Nexus Overview

Eppendorf Mastercycler Nexus Thermal Cycler Overview

The Eppendorf Mastercycler ® Nexus thermal cycler is a reliable easy to use thermal cycler range with low energy consumption and is ideally suited for daily and routine PCR operation. The Eppendorf Mastercycler can be easily expanded to 3 small units each with small footprints and are designed to fit perfectly onto any lab bench.

Eppendorf Mastercyler ® thermal cyclers feature flexlid. Flexlid accommodates all types of consumable from low volume all the way through to 0.5 ml PCR tubes.


Specifications for the Eppendorf Mastercycler® Nexus Gradient Thermal Cycler

Eppendorf Mastercycler Nexus Gradient Thermal Cycler
Thermoblock Aluminum
Sample capacity 96x 0.2 mL PCR tubes or 77x 0.5 mL PCR tubes or 1x
96 well PCR plate
Temperature control
Temperature control
Fast, Standard Safe; all in gradient mode
Heating technology
of the block
Peltier Elements, Triple Circuit Technology
Gradient Yes
Gradient block Over 12 columns
Gradient range 1-20°C
Gradient temperature
Lid temperature
Lid Type Flex lid for ergonomic lid opening
Block homogeneity 20-72°C < ±0.3°C, 95°C < ±0.4°C
Block temperature
≤ ±0.2°C
Heating rate approx. 3°C/s
Cooling rate approx. 2°C/s
Interfaces USB, Ethernet, CAN in/out
Power consumption 700 W
Dimensions (W x D x
25 x 41.2 x 32.1 cm
Weight 24 lb / 10.9 kg

GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements

Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1 Service Visit
Service Visit 1PM
1 Service Visit
1 2
Parts and Labor    

Discounted Parts
Discounted Labor (As needed)

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.


Your trusted source for new, factory clearance & certified pre-owned lab instruments since 1995.

  • We routinely save discerning laboratories 30-80% with our recertified pre-owned and factory clearance instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - proof that your instruments pass through a rigorous re-certification process to ensure that it arrives at your laboratory defect-free and in full working order.
We are neither an auction company nor an instrumentation broker. GMI employs our own factory-trained engineers to ensure full control of this process.
Unlike small-time businesses and brokers, GMI goes beyond offering money-back promises. We offer real product warranties.
Apart from our meticulous inspection processes, GMI’s available warranties and multi-year service agreements guarantee customer satisfaction - no need to go through frustrating and time-consuming product returns!
Additionally, all items are thoroughly cleaned and professionally packaged/crated with care to insure they arrive in your lab ready for use.