×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

SRI 8610C Gas Chromatograph (GC) TOGA Transfomer Oil Gas Analyzer

SRI 8610C Gas Chromatograph (GC) TOGA Transfomer Oil Gas Analyzer

Manufacturer:
GMI SKU#: 8331-10-0052
  • HID and/or TCD Detectors
  • Built-in PeakSimple Data System
  • MoleSieve and Silica Gel packed Columns
  • Syringe Pump for Industry Standard 50mL Syringes
  • Dual 10-port Gas Sampling Valves
  • Gas Extraction Loop
  • ...on the compact 8610C chassis

For more information or to place an offline order call 1-800-745-2710

OR
Description

The SRI TOGA (Transformer Oil Gas Analyzer) GC may be equipped with an HID detector TCD detector or both. The HID and TCD detectors are universal and can detect the entire spectrum of gases typically found dissolved in transformer oil: hydrogen oxygen nitrogen methane carbon monoxide carbon dioxide ethylene ethane and acetylene. For sub-ppm detection limits choose the HID detector. Excepting hydrogen the TCD can detect the target analytes down to 5-10ppm. For a 1-100% detection range for all of the analytes listed choose both detectors.

In the SRI TOGA GC the transformer oil sample is injected by syringe pump through a unique gas extraction loop. The extracted gases are then injected into the carrier gas stream by the dual 10-port valve injection system. The syringe pump accepts standard 50mL syringes. This means the sample can be loaded into the syringe from the transformer then into the syringe pump without ever being handled. This helps to protect the transformer oil sample from ambient contaminants.

Specification

SRI 8610C Gas Chromatograph (GC) TOGA Transfomer Oil Gas Analyzer Specifications

System
Diameter5
Width19 inch
Height13.5 inch
Depth14.5 inch
DetectorCombined FID/TCD
Temp range25 to 400°C
Temp controlprogrammable up to 15 ramp and dwell times
Stability ±0.1°C
Heating rate 50°C per minute to 300°C; 20°C per minute from 300 to 400°C
Cooling rate300 to 50°C in 5 minutes
Gas flow controlelectronic pressure control
Power115V 50/60 Hz
Services
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements


Bronze
Prevention
Plus
Silver
Assurance
Plus
Gold
Safety
Plus
Platinum
Premium
Plus
PM
Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1PM
or
1 Service Visit
Service Visit 1PM
or
1 Service Visit
1 2
Travel
Parts and Labor    

1 YEAR
Discounted Parts
Discounted Labor (As needed)
Parts

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.

WHY BUY FROM GMI?

Your trusted source for new & used lab equipment and instrument service since 1995.

  • We routinely save discerning laboratories 50-80% off retail on our recertified instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - your proof that your instrument purchase from GMI passes through rigorous refurbishhing,recalibration, and recertification process,arriving at your laboratory in fully working order and defect free. We are not an auction company,and nor are we an instrument broker...getting in the middle of 'deals'. All items come complete with the final QC date, engineer's ID# and a copy of test results/QC data, if applicable. Additionally, all items are thoroughly cleaned and professionally packaged/crated with care too ensure they arrive in your lab ready for professional installation.