Instrument Finder
-or-

PCR Thermal Cyclers arrow MJ Research PTC-200 Thermal Cycler

MJ Research PTC 200 Thermal Cycler Product Overview

The MJ Research PTC-200 DNA Engine, is a reliable peltier thermocycler that boasts of a polished and robust design. The Hot Bonnet heated lid fitted into the PTC 200 Thermo Cycler controls pressure and height. As a result, various plastic wares can be accommodated by the PTC-200 system. This feature enables oil-free cycling as well. The Peltier-effect heat pumps of the system facilitate repeated cycling using the Major Sciences PTC-200 thermal cycler.

Also Consider...
If you are interested in the MJ Research PTC 200 Thermal Cycler, you may also be interested in thermal cyclers from the following manufacturers

More from MJ Research Thermal Cycler Logo Techne Thermal Cycler Logo G-Storm Thermal Cycler Logo
Other MJ Research Thermal Cyclers Techne Thermal Cyclers G-Storm Thermal Cyclers

MJ Research PTC-200 thermal cyclers are equipped with interchangeable sample blocks and heat pump assemblies which allow users to easily change formats in between runs while maintaining NIST-traceable accuracy. Single control units of this model can also be supplied with different alpha modules and alpha blocks to increase functionality. Users can achieve thermal control with this instrument by using either a block-in sample probe or calculated methods. Block controls enhance compatibility with protocols while calculated sample temperature controls highly boost speed and accuracy.

Possible MJ Research PTC-200 Supplements

Alpha modules:

  • dual- independently controlled blocks
  • microplate format
  • slide adapter (for up to 16 slides)

Alpha blocks:

  • 96-well block
  • Dual 48-well block (to run two programs simultaneously)

This high performing MJ Research PTC-200 thermal cycler is easy to use independently or when accompanied by other instruments. A single cycler can be networked to control up to 15 separate instruments. Remote manipulation and monitoring of cyclers can be done through the use of a PC. In addition, PCs also allow for real time data export to video screens or databases.

The MJ Research PTC-200 DNA Engine thermal cycler’s large memory, dependable software and robust design ensure that tests produce accurate results and are hassle-free.

Click to inquire about this product online or call us on 800 745-2710 today to learn more about the MJ Research PTC-200!

MJ Research PTC-200 Thermal Cycler Specifications

General
Thermal range -5 to 105C. but no more than 30C below ambient temperature
(4 to 100C for the Slide Chambers Alpha unit)
Thermal Accuracy - or + 0.3C of programmed target at 90C- NIST-traceable
Thermal uniformity - or + 0.4C well-to-well within 30 seconds of arrival at 90C
(for most Alpha units; see specifications for individual Alpha units)
Input/Output
Parallel One 25-pin 8-bit parallel interface printer port
Serial One 9-pin RS-232 serial port for printer or remote use
IEEE One IEEE-488 bidirectional general purpose interface bus
Display One 20 x 4 LCD alphanumeric display
Dimensions
W x L x H 12 in. x 12 in. x 12 in.
Weight 25lbs
Miscellaneous
Ramping speed up to 3°C/sec in models that hold 0.2ml tubes or V-well plates
Capacity Varies with installed Alpha unit
Temperature homogeneity 0.4°C within 30 seconds of arrival @ 60°C for all standard models.
Line Voltage DNA Engine® cycler: 100–240 VAC rms
(no adjustment needed among voltages within these ranges)
Frequency 50–60 Hz single phase
Power DNA Engine cycler: 850 W maximum
Fuses Two 6.3 A, 250 V, 5 x 20 mm

Gradient Specification (96V Aplha module only)

Grandient Specications
Accuracy +0.3°C of programmed target at end columns,
30 seconds after the timer starts for the
gradient step, NIST–traceable
Column uniformity +0.4°C, well–to–well within column,
within 30 seconds of reaching target temperature
Gradient calculator accuracy +0.4°C of actual well temperature
Lowest programmable temperature 30°C
Highest programmable temperature 105°C

Over A Decade in Delievering Service Excellence

Does your Thermal Cycler Need Parts, Service or Repair?

Get a Repair Get Parts Get Service

We have literally delivered thousands of fully recertified MJ Research PTC thermal cyclers to customers all around the world over the past decade. Our experience and expertise does not end with the delivery of your fully recertified instrument.

The fact that this is one of our most popular instruments means that we have earned the due diligence to be a full service provider for this unit (and of course many others).

  • Unparalleled expertise with the service and maintenance of this instrument
  • We carry the lions share of all MJ Research Instruments in circulation and for sale
  • We always have parts available for MJ Research Instruments

Buy MJ Research Parts Online



MJ Research PTC 200 Thermal Cycler: Measuring Up to the Competion

Here is a list of compariable thermal cyclers to the MJ Research PTC 200 which are also have available for purchase from GMI.

Thermal Cycler Thermal Properties Dimmensions Connectivity
Range Accuracy Unifrom   USB Parrallel Parrallel Parrallel
MJ Research PTC 200 -5-105°C ±0.3°C ±0.4°C 30x30x30 cm - Parrallel Available Available
Techne 3000 4-99°C ±0.1°C ±0.1°C 33 x 18.5 x 19 cm - - Available -
GSTORM 482 4-99°C ±0.4°C ±0.4°C 29 x 24 x 31 cm Available - - -
Perkin Elmber 9700 4-99°C ±0.25°C - 24 x 28 x 41 cm - - Available -

Techne TC-3000 PCR Thermal Cycler G-STORM GS 482 THERMAL CYCLER Perkin Elmer PE 9700 Thermal Cycler

Perfect Instrument Partnerships

If you are considering the MJ Research PTC 200 thermal cycler as an addition to your lab you may also be interested to learn that GMI also stocks many other instruments that you may wish to consider which would be invaluable to your research.

Gel Documenation
arrow Spectrophometry
arrow Thermal Cycling
arrow Centrifugation
     

Buy your New or Used MJ Research PTC 200 from GMI today!

Buy New or Used PTC 200 Therocycler
Condition: This is a used instrument that has been fully recertfied.
Pricing: Please inquire for pricing.