×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

JA-25.50 Fixed Angle Rotor

JA-25.50 Fixed Angle Rotor

Manufacturer: Beckman Coulter
GMI SKU#: 5043-30-0017
Beckman JA25.50 Rotor, up to 25,000 rpm

For more information or to place an offline order call 1-800-745-2710

OR
Description
JA-25.50 Rotor, Fixed Angle, Aluminum, Single Lock Lid, 8 x 50 mL, 25,000 rpm, 75,600 x g. Typical applications include pelleting bacteria, processing tissue homogenates, subcellular particulates, and other routine pelleting such as precipitates and phase separations. For use in Avanti® J Series and the classic but ultra reliable J2 series centrifuges. The JA-25.50 fixed-angle rotor is designed to hold up to eight 50-mL tubes at a 34-degree angle). Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-25.50 rotor develops centrifugal forces that can efficiently pellet cells from large volumes, or cell particles from tissue homogenates. Short column methods (i.e., partially filled tubes) may also be used to purify large quantities of virus in a cushion gradient. The JA-25.50 rotor has a patented fluid-containment annulus, located below the O-ring sealing surface (see Figure 2). If tubes are overfilled or if leakage occurs during centrifugation, the annulus holds enough volume that all of the liquid is kept inside the rotor—even if all eight tubes leak at the same time. This feature virtually eliminates the escape of liquid into the centrifuge chamber.
Specification
Rotor Material Anodized Aluminum
Imbalance Tolerance 2 g
r min: 38.5 mm
r av: 73.2 mm
r max: 108.0 mm
Nominal Rotor Capacity: 400 mL
Number of tubes x Tube (ea) Capacity: 8 x 50 mL
Nominal Largest Bucket Dimensions: 29 x 104 mm
Services
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements


Bronze
Prevention
Plus
Silver
Assurance
Plus
Gold
Safety
Plus
Platinum
Premium
Plus
PM
Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1PM
or
1 Service Visit
Service Visit 1PM
or
1 Service Visit
1 2
Travel
Parts and Labor    

1 YEAR
Discounted Parts
Discounted Labor (As needed)
Parts

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.

WHY BUY FROM GMI?

Your trusted source for new & used lab equipment and instrument service since 1995.

  • We routinely save discerning laboratories 50-80% off retail on our recertified instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - your proof that your instrument purchase from GMI passes through rigorous refurbishhing,recalibration, and recertification process,arriving at your laboratory in fully working order and defect free. We are not an auction company,and nor are we an instrument broker...getting in the middle of 'deals'. All items come complete with the final QC date, engineer's ID# and a copy of test results/QC data, if applicable. Additionally, all items are thoroughly cleaned and professionally packaged/crated with care too ensure they arrive in your lab ready for professional installation.