Login to MyGMI
Automatic Rotor Life Management System
Total run times and total accumulated operating hours are managed automatically by the system. The RLM sensor of the ultracentrifuge reads the latest information of total nun times and total accumulated operating hours from the RLM adapter during the acceleration and the latest information of total run times and total accumulated operating hours are recorded in the RLM memory assembled on the rotor during the deceleration.
Rotor life is maximized
Automatic Rotor Life Management systems tracks the rotor usage precisely in the nearest of 0.1 time and 0.1 hours means, the rotor life is extended as much as 10 times longer than as conventional calculation. (by manual recording to the rotor log book)
Visual Balancing by non-contact imbalance sensor
Do you still adjust balance between sample tubes using scale or balance before the centrifugation? himac ultracentrifuge model CP-NX series offers visual balancing with max. 5mm sample surface difference between the sample tubes*1. (*1: except P21A2 rotor)
The visual balancing was realized by the non-contact imbalance sensor which monitors oscillation of the drive shaft during the rotation. Imbalance alarm criteria were optimized based on the characteristics of each rotor, so that system offers bigger imbalance tolerance. Of course, the sensor activates the imbalance alarm and stops rotation immediately in case the abnormal oscillation is detected.
Economy Mode * for energy saving
The stand-by electricity consumption is reduced max. 50%**, compared with our former model, by deeming the backlight of the LCD, stopping cooling fans, stopping cooling system and so on, if the control panels is not touched over the set period (setting range : 1 -180 mins). * The mode works while drive unit and vacuum pump are stopped
** under in-house test condition
Operating History : Max. 5,120 logs
Max. 5,120 operating logs can be recorded in the system automatically. You can export the data according to a user and/or rotor in CSV format through USB port.
Programmed Operation : 1,000 programs
You can register up to 1,000 programs for programmed operation to the system. Folder is used to manage the registered programs.You can select folder's color from 4 colors paired with a character for easy identification of the registered program.
User Lockout (standard function)
Operator can be registered to the system with 3-level access level (Administrator, Supervisor, User). Operational functions can be limited by the access level. You can register up to 50 users. Password should be entered to log-in the system.
- Tube Sealer model STF3
- The STF3 is heat-welding tube sealer to use the seal tubes with fixed angle rotors, vertical rotors and neo angle rotors.
- S-Cap Series
himac original S-cap series offer simple and easy operation of the tube cap for open-top (thin-walled) tubes.
The unique system requires just three components and three steps to assemble the cap to the tube.
* No consumables, such as O-ring
* Easy cleaning and no maintenance of the components
Three assembling steps
1. Fill sample into the tube up to 80% volume and insert AL Stem into the tube by the tool.
2. Assemble Ti Ring on the tube and tighten AL Stem and Ti Ring by the tool.
3. Fill up the sample into the tube by an injector and close Setscrew.
Disassemble procedure after the centrifugation is also simple and easy.
1. Remove Setscrew and withdraw 20% supernatant from the center hole of AL Stem by the injector.
2. Remove Ti Ring to downwards by hand.
3. Connect tube setter into the center hole of AL Stem and remove the AL Stem by moving the tube setter left and right slowly and gradually pulling up AL Stem.
Part No. Description Remarks S410542A S-12AL Cap Assy (1pc/set) 12PA/12PE tube S410532A S-40AL Cap Assy (1pc/set) 40PA/40PE tube S308625A S-Cap Tool Set S308626A S-12AL Cap Tool Set (8caps/set) 12PA/12PE tube S308626B S-12AL Cap Tool Set (12caps/set) 12PA/12PE tube S308627A S-40AL Cap Tool Set (8caps/set) 40PA/40PE tube S308627B S-40AL Cap Tool Set (12caps/set) 40PA/40PE tube
Model CP100NX CP90NX CP80NX Max. Speed (rpm) 100,000 90,000 80,000 Max.RCF (xg) 803,000
Speed Control Accuracy ±2 rpm (1,000 rpm to max. speed) ACCEL/DECEL Mode ACCEL : 10 / DECEL : 11 (10 and coasting) Set Speed Range 1,000 rpm to max. speed in increments of 100 rpm Timer from 1 min to 999 hours 59 min (with 1 min increments) with HOLD function Set Temperature Range from 0ºC to 40ºC with 1ºC increments (Accuracy : +/- 0.5ºC) Vacuum System Oil rotary vacuum pump and oil diffusion pump Operating Sound 51dB(A) (running at set speed, under in-house test condition) Heat Radiation Into a Room 1kW or below Cooling System Thermo-module cooling system (CFC/HCFC/HFC-free) Control Panel Touch-sensitive color LCD panel (6.5 inch) Data Communication USB : Host x 1, Devise x 1 / LAN x 1 Rotor Life Management Automatic Rotor Life Management for rotors with RLM adapter
Registered by serial number to the system for rotors with optical overspeed disk
Size (mm) 790 (W) x 690(D) x 880(H) (with door cover : 890(D))
Max. height to the end of the door handle : 925(H) / Height to the table : 863(H)
Floor area (m2) 0.81 (900 x 900 mm) Weight (kg) 390 Power Single phase, AC200V, 208V and 220V +/-10%, Max. 20A (normally 8A)
Single phase, AC230V and 240V +/-10%, Max. 16A (normally 7A)
Installation Environment Ambient temperature for operation : 2ºC to 40ºC
Ambient temperature for performance guarantee : 10ºC to 30ºC
Standard CE marking qualified
Product Safety : EN61010-1 and EN 61010-2-020 Electromagnetic Compatibility : EN 61326-1
Warranty of Drive Unit 10 years after the shipment (Full warranty) *1 Part No. (Asia/Middle East) 901067C1 901068C1 901069C1 Part No. (EU market) 901067C2 901068C2 901069C2 Part No. (USA/Canada) 901067C3 901068C3 901069C3
We also carry instruments parts for the following other instruments categories.
- Amino Acid Analysis Parts
- Atomic Absorbtion Parts
- Autoclave Sterilizer Parts
- Balances Scale Parts
- Biochromatography Parts
- Biological Safety Cabinet Parts
- Biological Safety Cab Parts
- Blood Gas Anal-Coox Parts
- Blood Gas Parts
- Capillary Electrophoresis Parts
- Cell Processor Parts
- Centrifuge Consumables
- Centrifuge Parts
- Chart Recorder Parts
- Chemistry Analyzer Auto Parts
- Chemistry Analyzer Parts
- Chiller Heater ReCirculator Parts
- Coagulation Analyzer Parts
- Computer Peripheral Parts
- Concentrator Parts
- Consumable Lab Supplies Parts
- Cooximeter Parts
- Counter Colony Parts
- Cryo Storage Parts
- Densitometer Parts
- Dessicator Parts
- Digester Parts
- Diluter Parts
- Dissolution System Parts
- DNA Sequencer Parts
- DNA Synthesizer Parts
- Electrolyte Analyzer Parts
- Electrophoresis Parts
- Evaporator-Rotovap Parts
- Fermenter Bioreactor Parts
- Filter Testing Parts
- Flame-ISE Parts
- Flow Cytometer Parts
- Fraction Collector Parts
- Freeze Dryer Parts
- Freezer Parts
- Fume Hood Parts
- Gamma Counter Parts
- Gas Chromatograph Consumables
- Gas Chromatograph Parts
- Glove Box Parts
- Glucose Analyzer Parts
- Hematology Analyzer Parts
- Histology Consumables
- Histology Parts
- Homogenizer Parts
- HPLC Parts
- Immunoassay Parts
- Immunology Analyzer Parts
- Incubator Parts
- Integrator Parts
- Mercury Analyzer Parts
- Microbiology System Parts
- Microplate Reader Parts
- Microplate Washer Parts
- Microscope Parts
- Microscopes Parts
- Mill & Grinder Parts
- Mills and Grinder Parts
- Moisture Analysis Parts
- Molecular Imager Parts
- Osmometer Parts
- Oven Parts
- Particle & Cell Counters Parts
- Particle and Cell Counter Parts
- Parts Miscellaneous Parts
- pH Parts
- Pipetting Parts
- Production Factory Parts
- Protein Characterization Parts
- Protein Sequencer Parts
- Pump Parts
- Pumps Parts
- Reagent Parts
- Refractometer Parts
- Refrigerator Parts
- Robotic Liq Handler Parts
- Scintillation Consumables
- Scintillation Counter Parts
- Sonicator Homogenizer Parts
- Spectrophotometer Parts
- Speed Vac System Parts
- Stirrer Mixer Shaker Parts
- Test and Measurement Parts
- Thermal Analysis Parts
- Thermal Cycler Parts
- Thermal Cycler PCR Parts
- Trace Metal Anayzer Parts
- Urinalysis Parts
- Viscometry Parts
- Water Bath Parts
- Water Purification Parts
WHY BUY FROM GMI?
Your trusted source for new & used lab equipment and instrument service since 1995.
Shop a comprehensive selection of brand new lab instruments from trusted brand names.
Enjoy big savings on New Instrument purchases with our Trade In & Trade Up Program.
Experience customer-driven services. We offer training and installation options as well as multi-year service agreements.