×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Bio-Rad GS-700 Imaging Densitometer

Bio-Rad GS-700 Imaging Densitometer

Manufacturer:
GMI SKU#: 8054-30-1002
  • Adjustable resolution from 25 up to 1200 dots per inch (dpi)
  • Reflectance and transmittance modes
  • Equipped with stationary platen for higher reliability
  • Flexible wavelength lamp or filter architecture for improved color discrimination
  • Converts electrophoretic samples from analog to digital data form

For more information or to place an offline order call 1-800-745-2710

OR
Description

The Bio-Rad GS-700 Imaging Densitometer is a high performance laboratory instrument. This third generation scanning densitometer allows for the conversion of transparent and opaque electrophoretic samples into digital images for further densitometric analysis. Acquisition of stains including silver and Coomassie blue types can be conveniently carried out with this system.

Depending on user preference, images produced by the Bio-Rad GS 700 can be exported to other software packages for further analysis. The base version of Bio-Rad's Quantity One software comes with the system upon purchase.

Call us today to learn more about the Bio Rad GS-700 Imaging Densitometer!

Specification

Bio-Rad GS-700 Imaging Densitometer Specifications

 
Color SeparationSingle CCD sensor in conjunction with
fluorescent lamps and three RGB filters
Scanning ResolutionVariable resolution from 25 to 1200 dpi
Gray Scales12-bit A/D conversion
Effective Scanning Area21 cm x 35.5 Reflective Mode
20 cm x 25.5 Transmittance Mode
InterfaceSCSI Interface – Double Connector
Transmission Speed1 Mbyte/second
Lamp8W daylight fluorescent light
Warm up time35 seconds, 5 minute
for stable operation
VoltageLine voltage: 90 to 264 volts
Frequency: 47 to 63 Hz
Power: 40 watts maximum
WeightApprox. 16.1 kg
Dimensions (L x W x H)60 cm x 41 cm x 20 cm
EnvironmentOperating temperature: 10'C to 55'C
Storage temperature: -25'C to 55'C
Relative humidity: 20 to 95%
Surrounding space: 15 cm on each side
Services
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements


Bronze
Prevention
Plus
Silver
Assurance
Plus
Gold
Safety
Plus
Platinum
Premium
Plus
PM
Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1PM
or
1 Service Visit
Service Visit 1PM
or
1 Service Visit
1 2
Travel
Parts and Labor    

1 YEAR
Discounted Parts
Discounted Labor (As needed)
Parts

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.

WHY BUY FROM GMI?

Your trusted source for new & used lab equipment and instrument service since 1995.

  • We routinely save discerning laboratories 50-80% off retail on our recertified instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - your proof that your instrument purchase from GMI passes through rigorous refurbishhing,recalibration, and recertification process,arriving at your laboratory in fully working order and defect free. We are not an auction company,and nor are we an instrument broker...getting in the middle of 'deals'. All items come complete with the final QC date, engineer's ID# and a copy of test results/QC data, if applicable. Additionally, all items are thoroughly cleaned and professionally packaged/crated with care too ensure they arrive in your lab ready for professional installation.