×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Becton Dickinson Sero-Fuge 2001 Centrifuge

Becton Dickinson Sero-Fuge 2001 Centrifuge

Manufacturer: Becton Dickinson
GMI SKU#: 8094-30-0002
  • Ultra-quiet operation
  • on-board tachometer
  • solid state digital timer
  • Locking lid - for added safety
  • Precision speed control

For more information or to place an offline order call 1-800-745-2710

OR
Description

The Becton Dickinson Sero-Fuge 2001 Centrifuge is a compact single speed (3100-3500 rpm) table-top centrifuge specifically designed to handle clinical samples facilitating blood testing procedures.. It has a number of nice features including a lid safety latch which prevents the centrifuge from spinning while the lid is open puts the lid in lock mode when closed and prevents the lid from opening until the centrifuge comes to a full stop. The centrifuge is conveniently shipped fully assembled with a rotor already inside the unit. The 12-place rotor can accommodate Sero-Tubes (75 mm x 10 mm) Kahn Tubes (75 mm x 12 mm) and 75 mm x 13mm tubes. Becton-Dickinson also offers 8 and 6-place rotors that accommodate different types of tubes. In addition to the tubes mentioned above the 8-place rotor can accommodate Vacutainer Blood Collection Tubes 64 mm x 10.25 mm tubes 82 mm x 10.25 mm tubes 100 mm x 13 mm tubes and 103 mm x 10.25 mm tubes. The 6-place rotor can accommodate 100 mm x 13 mm and 103 mm x 10 mm tubes.

The Becton Dickinson Sero-Fuge 2001 Centrifuge is relatively easy to operate because the controls and indicators are conveniently located in the keypad display on the front panel of the machine. Pressing the keys results in a positive ?keyclick? sound. The display shows the i) cycle time which is the time for the motor to ramp up to speed and ii) the digital tachometer readout in revolutions per minute (RPM). The display can cycle between the two readouts by pressing the tachometer readout key. The numeric keypad is used to enter the desired cycle time that can be set up to 99 minutes and 99 seconds. There is also an alarm key (that can be turned on or off) that alerts the user when the spin is done. At the end of the spin the centrifuge has an effective brake in decelerating the spin in a very short period of time. However this brake can be enabled/disabled easily via a key in the keypad display. If the user wants to stop the spin before the cycle time is finished he or she can just press stop spin cycle key. Conveniently there is a repeat key that allows the user to set the cycle time to match the previous run without having to enter the numerical time value again.

Maintainence of the Becton Dickinson Sero-Fuge 2001 Centrifuge requires the user to periodically check the speed to make sure it is within the limits of the machine. This can be checked with any accurate photoelectric tachometer by loading any one of the rotors to capacity. The machine speed can then be compared with the specified limits stated in the manual. Becton Dickinson recommends that the unit be checked at least twice a year. If readings outside the limit are obtained than the AC supply should be checked.

Becton Dickinson Sero-Fuge 2001 Centrifuge Features

  • Ultra-quiet operation
  • on-board tachometer
  • solid state digital timer
  • Locking lid - for added safety
  • Precision speed control
  • Low maintenance finish

Summary of Features: the Becton Dickinson Sero-Fuge 2001 Centrifuge is a compact light centrifuge that can be used for everyday applications. It is relatively easy to operate and generates very little noise and fits in any area of the laboratory. It also contains convenient features like alarm an effective dynamic brake that can be turned on or off and repeat key to reuse the same cycle time without having to enter the cycle time again. It is also very easy to put in the different types of rotors to accommodate different types of tubes. This unit is frequently used in modern laboratories throughout the world

Services
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements


Bronze
Prevention
Plus
Silver
Assurance
Plus
Gold
Safety
Plus
Platinum
Premium
Plus
PM
Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1PM
or
1 Service Visit
Service Visit 1PM
or
1 Service Visit
1 2
Travel
Parts and Labor    

1 YEAR
Discounted Parts
Discounted Labor (As needed)
Parts

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.

WHY BUY FROM GMI?

Your trusted source for new & used lab equipment and instrument service since 1995.

  • We routinely save discerning laboratories 50-80% off retail on our recertified instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - your proof that your instrument purchase from GMI passes through rigorous refurbishhing,recalibration, and recertification process,arriving at your laboratory in fully working order and defect free. We are not an auction company,and nor are we an instrument broker...getting in the middle of 'deals'. All items come complete with the final QC date, engineer's ID# and a copy of test results/QC data, if applicable. Additionally, all items are thoroughly cleaned and professionally packaged/crated with care too ensure they arrive in your lab ready for professional installation.