×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Beckman Avanti J-30i

Beckman Avanti J-30i

Manufacturer: Beckman Coulter
GMI SKU#: 8043-30-1096
  • Rapid separations
  • Processes 10 microplates in a single run
  • High-torque switched resistance (SR) drive
  • Fastest accel/decel rates
  • Rate zonal centrifugation

For more information or to place an offline order call 1-800-745-2710

OR
Description

The Beckman Avanti® J-30I High Performance Centrifuge performs the maximum amount of separations possible in the minimum amount of time. Its swinging-bucket and fixed-angle rotors enable maximum protein separation forces in excess of 100,000 x g at up to 30,000 rpm. With its easy run set-up, the J-30I centrifuge system allows processing of up to 10 microplates in a single run. Also, the high-torque switched-resistance (SR) drive provides the fastest possible accel/decel rates with gentle precision. Processes involve very low energy consumption.

The ultracentrifuge power of the Avanti® J-30I ensures outstanding rotor efficiency and improved workflow momentum. Using rate zonal centrifugation, the J-30I effectively separates subcellular organelles by means of the JS-24.38, a 6 x 38 mL swinging-bucket rotor. Additionally, this Beckman centrifuge delivers a four-liter batch throughput for bacteria and cell membrane isolation via a JLA-9.1000 J-LITE® rotor at 16,800 x g.

Advanced capabilities of the Beckman Avanti® J-30I centrifuge include a digital control panel, SpinTrace® software compatibility, 12 accel/decel rates, simultaneous viewing of set and actual run conditions, creation and storage of up to 30 2-step user programs, and zonal rotor capability.

Call us today to learn more about the Beckman Avanti® J-30I High Performance Centrifuge!

Specification
 
Height 86 cm (34 in); with door open 141 cm (55.5 in)
Width 71 cm (28 in)
Depth 86 cm (34 in); 102 cm (40.25 in) including air diverter extending from back panel
Weight 310 kg (680 lb)
Approximate Acceleration Time Maximum, slow, or timed (1 to 10 min from 0 to 500 rpm)
Approximate Deceleration Time Maximum, slow, timed (1 to 10 min from 500 to 0 rpm), or off
Friction Reduction System (FRS) A mechanical rotary vane pump reduces chamber pressure dependent on rotor and run speed
Maximum Heat Dissipation
into Room under
Steady-State Conditions
2.0 kW (6,900 Btu/hr)
Noise Level 1 Meter
in Front of Centrifuge
57 dBA
Set Speed Actual rotor speed ± 10 rpm from
10,000 to 30,000 rpm or equivalent RCF
Set Temperature -20 to +40°C in 1°C increments
Set Time 1 min to 99 hr 59 min, or continuous (hold)
Speed Range 0 to 30,000 rpm or equivalent RCF;
0 to 6,000 rpm for elutriation
Temperature Control ± 2°C of set temperature
(after equilibration)
Ambient Temperature Range 16 to 38°C
Clearances Required 7.6 cm (3.0 in) sides;
16.0 cm (6.25 in) rear
Door 5.4-cm (2.1-in) thick structural foam with steel plate
Humidity Restrictions < 95% (noncondensing)
Pollution Degree 2
Rotor Chamber Diameter 40.6 cm (16 in)
Time - Actual Display Indicates run time remaining (timed run)
or elapsed time (hold run)
Services
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements


Bronze
Prevention
Plus
Silver
Assurance
Plus
Gold
Safety
Plus
Platinum
Premium
Plus
PM
Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1PM
or
1 Service Visit
Service Visit 1PM
or
1 Service Visit
1 2
Travel
Parts and Labor    

1 YEAR
Discounted Parts
Discounted Labor (As needed)
Parts

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.

WHY BUY FROM GMI?

Your trusted source for new & used lab equipment and instrument service since 1995.

  • We routinely save discerning laboratories 50-80% off retail on our recertified instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - your proof that your instrument purchase from GMI passes through rigorous refurbishhing,recalibration, and recertification process,arriving at your laboratory in fully working order and defect free. We are not an auction company,and nor are we an instrument broker...getting in the middle of 'deals'. All items come complete with the final QC date, engineer's ID# and a copy of test results/QC data, if applicable. Additionally, all items are thoroughly cleaned and professionally packaged/crated with care too ensure they arrive in your lab ready for professional installation.