×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Agilent 1200 Quat VWD System

Agilent 1200 Quat VWD System

Manufacturer: Agilent
GMI SKU#: 8012-30-1291
  • Compact, benchtop design builds on the 'near flawless' 1100
  • Wide flow range of up to 10 mL/min (at 200 bar) that enables semi-preparative separations
  • Wide selection of autosamplers for full flexibility in injection volumes and sample containers
  • Programmable single λ analysis, 1 signal, 13 Hz data rate
  • GMI offers Training & Installation Packages
  • Did you know that GMI sells Brand New HPLC Systems ?

For more information or to place an offline order call 1-800-745-2710

OR
Description

GMI is offering the following fully Certified PreOwned Agilent 1200 series VWD HPLC system for sale.

This system is consists of :
Agilent Model G1311 quaternary pump
Agilent Model G1314 variable wavelength detector
Agilent Model G1322 degasser
Agilent Model G1330 autosampler
Agilent Model G1316 thermostatted column compartment
Agilent 1200 Solvent Tray with 2 solvent bottles
Computer Data System with NEW Data (Clarity for Windows 10) Analysis Software
New 19" Flat Panel Monitor
All cables, keyboard, mouse, & complete performance documentation

$ Call us for a quote on this Certified Pre-Owned Agilent 1200 HPLC system !

Like the 1100 series the 1200 model is a workhorse for the demanding needs of any QA/QC lab for the most advanced analytical and method development applications.

The heart of any HPLC system is the pump. The 1200 quaternary pump model G1311 is designed for routine method development and high throughput gradient applications for greatest flexibility with multisolvent gradients by accessing up to 4 solvents. Accurate flow rates coupled with low pulsation = awesome

The G1314 VWD detector gives you high sensitivity information from 190 to 600 nm The dual-lamp design and the temperature control of the Agilent 1200 Series VWD ensure outstanding sensitivity....it will NOT cramp your analytical capability.

The 1200 series autosampler typical repeatability and LACK of carryover is astronomically outstanding. Superior injection precision and lowest carryover makes your runs trustworthy day in day out. The 1200 autosamplers provide for precision levels of < 0.5 % RSD over an injection volume range from 0.01 μL to 2000 μL. The unique flow-through design, combined with the external needle wash and optional multiple wash solvents, virtually eliminates carryover, even for highly adsorptive compounds.

Why buy from GMI?

You can count on GMI for your re-Certified 1200 HPLC because as an ISO 9001:2008 company we remove 100% of the risk of buying pre-owned HPLC instrumentation !

GMI offers complete and comprehensive maintenance and support plans – your choice.

Rentals or Lease? No problem. We’d love to help with your financing. Thank you once again for considering purchasing this Re-Certified, refurbished-to-specification, Agilent 1200 HPLC from GMI.

For over 20 years and scores of installations later GMI has removed 100% of the risk in ‘buying used’ chromatography instrumentation to discerning scientists like you. GMI is a ISO 9001:2008 certified company – your proof that your instrument purchase from GMI passes through rigorous refurbishing, recalibration, and recertification process, arriving at your laboratory in fully working order and defect free. We are not an auction company, and we nor are we an instrument broker… getting in the middle of ‘deals’. All items come complete with the final QC date, engineer’s ID#, and a copy of test results / QC data, if applicable. Additionally, all items are thoroughly cleaned and professionally packaged / crated with care to ensure they arrive safely in your lab ready for professional installation.

Service, Parts, Relocations, Installations, Validations, Buy, Sell, Rent, Lease – one call does it all from GMI

Do you own an 1100 and want to ‘move up’ to a BRAND NEW system?

Your 1100 is eligible for the GMI “Trade-In Trade-up Program against our New Line of HPLCs” Ask your representative today how to save over 7000.00 on a NEW HPLC system from GMI!

Specification

Performance Specification Agilent 1200 G1311 Series Quaternary Pump

TypeSpecification
Hydraulic systemDual plunger in series pump with proprietary servo-controlled variable stroke drive, floating plungers and active inlet valve
Setable flow range0.001 – 10 ml/min, in 0.001 ml/min increments
Flow range0.2 – 10.0 ml/min 
Flow precision0.07% RSD, or £ 0.02 min SD whatever is greater, based on retentiontime at constant room temperature
Flow accuracy± 1% or 10 µl/min whatever is greater
Pressure Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min
Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min
Pressure pulsationless than 2 % amplitude (typically 1 MPa (10 bar)
Compressibility compensation User-selectable, based on mobile phase compressibility
Recommended pH range1.0 – 12.5, solvents with pH less than 2.3 should not contain acids which attack stainless steel
Gradient formation Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve Delay volume 800 – 1100 µl, dependent on back pressure
Composition Range0 – 95 % or 5 – 100 %, user selectable
Composition Precision< 0.2 % RSD, at 0.2 and 1 ml/min
Recommended pH range1.0 – 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel
Control and data evaluationAgilent control software (e.g. Clarity, ChemStation, EZChrom, OL, etc.)
CommunicationsController-area network (CAN), GPIB, RS-232C, APG Remote: ready,start, stop and shut-down signals, LAN optional
Safety and maintenance Extensive diagnostics, error detection and display (through control module and Agilent Lab Monitor & Diagnostic Software), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
GLP featuresEarly maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with user-settable limits and feedback messages. Electronic records of maintenance and errors.
HousingAll materials recyclable

Performance Specifications Agilent 1200 G1314 Variable Wavelength Detector

TypeSpecificationComments
Detection typeDouble-beam photometer
Light sourceDeuterium lamp
Wavelength range190–600 nm
Short term noise (ASTM)± 0.75 × 10-5 AU at 254 nmSee NOTE
Drift3 × 10-4 AU/hr at 254 nmSee NOTE
Linearity> 2 AU (5%) upper limitSee NOTE
Wavelength accuracy± 1 nmSelf-calibration with deuterium lines, verification with holmium oxide filter
Band width6.5 nm typical
Flow cells Standard: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximumHigh pressure: 14-µl volume, 10-mm cell path length and 400 bar (5880 psi) pressure maximum
Micro: 1-µl volume, 5-mm cell path length and 40 bar (588 psi) pressure maximum
Semi-micro: 5-µl volume, 6-mm cell path length and 40 bar (588 psi) pressure maximum
Can be repaired on component level
Control and data evaluationAgilent ChemStation for LC
Analog outputs
Communications Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optionalGPIB for G1314B only
Safety and maintenanceExtensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Lowvoltages in major maintenance areas.
GLP features Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter.
HousingAll materials recyclable.
Services
GMI Certified Service means:
  • Healthy operation of your instrument
  • Helping to ensure the quality of your results
  • Lowering cost of ownership through multilple service agreement options
  • Prolonging instrument serviceable life
  • Safe Operation of your equipment
  • Minimizing downtime increases productivity and minimizes revenue loss
  • Instrument Evaluation Services
  • Contract Refurbishing
  • Relocation Services
  • Equipment Finder Service
  • Training Courses
  • Depot Repair
  • Instrument Decommisioning & Disposal Services
Service Agreements


Bronze
Prevention
Plus
Silver
Assurance
Plus
Gold
Safety
Plus
Platinum
Premium
Plus
PM
Preventative Maintenance Visit
('tune up', including cleaning, lubrication, and adjustments)
1PM
or
1 Service Visit
Service Visit 1PM
or
1 Service Visit
1 2
Travel
Parts and Labor    

1 YEAR
Discounted Parts
Discounted Labor (As needed)
Parts

Lab Equipment Replacement Parts & Accessories

Click button to view parts which are available for this instruments and instruments like it in our brand new online parts shop.

We also carry instruments parts for the following other instruments categories.

WHY BUY FROM GMI?

Your trusted source for new & used lab equipment and instrument service since 1995.

  • We routinely save discerning laboratories 50-80% off retail on our recertified instrument offerings.

  • Quality? ISO 9001:2008 certified means we remove 100% of the risk in buying ‘used’ laboratory equipment.

  • Warranties from 90 days to a year as well as multi-year service agreements are available.

GMI is an ISO 9001:2008 certified company - your proof that your instrument purchase from GMI passes through rigorous refurbishhing,recalibration, and recertification process,arriving at your laboratory in fully working order and defect free. We are not an auction company,and nor are we an instrument broker...getting in the middle of 'deals'. All items come complete with the final QC date, engineer's ID# and a copy of test results/QC data, if applicable. Additionally, all items are thoroughly cleaned and professionally packaged/crated with care too ensure they arrive in your lab ready for professional installation.