Built-in Method 5030 or 5030/5035 compliant Purge & Trap
4 channel PeakSimple Data System
60-meter Capillary Column
...on the compact 8610C chassis
The SRI Multiple Gas Analyzer #1 (MG#1) GC is pre-plumbed and ready to resolve H2 O2 N2
Methane CO Ethane CO2 Ethylene NOx Acetylene Propane Butanes Pentanes and C6 through C8. The basic version of the MG#1 has a TCD detector. An HID detector or an FID with the integrated Methanizer may be added.
The MG#1 allows you obtain complete analyses of the fixed and natural gases listed above with a single injection. The MG#1 achieves this using a 10-port gas sampling valve with a 1mL sample loop in the heated valve oven and two columns in the temperature programmable column oven
SRI 8160 Gas Chromatograph Multiple Gas Analyzer MG1 GC Systems Specifications
FID/TCD or HID
25 to 400°C
programmable up to 15 ramp and dwell times
50°C per minute to 300°C; 20°C per minute from 300 to 400°C
300 to 50°C in 5 minutes
Gas flow control
electronic pressure control
115V 50/60 Hz
New GMI Parts Shop
link, to view parts which are available for this instruments and instruments like it in our brand new online parts shop.
We also carry instruments parts for the following other instrument categories.
It is never a good thing when things don't go quite to plan. If your laboratory instrument is giving you trouble you have come to the right place! In three simple steps you can be on your way receiving a quote on the repair of your broken lab instrument.
Step 1. Tell us a little about the instrument that is giving you trouble:
If you purchased your instrument from GMI in the past, It will have a Product Identification Number, this can be easily found by locating the PID sticker. The PID Sticker resembles something like this.