New Brunswick Scientific Innova 4000 Benchtop Incubator Shaker

Digital Display
Agitation 25 - 500 RPM, ±1 RPM
4000: Temperature Range: 5°C above ambient to 60°C
4080: Temperature Range: 5°C above ambient to 80°C
Hydraulic Arm Eases Lid Opening and Closing
Rapid Air Circulation Produces Quick Temperature Equilibration and Recovery
See-Through Lid Provides Complete Visibility Minimizing the Need to Open the Chamber
Interchangeable, Large-Capacity Accessory Platforms, 18" x 18" (46 x 46 cm), Accept Gel Trays, Culture Tubes and Flasks to 2.8 L
Automatic Cut-Out of Shaker When Lid is Opened
Fail-Safe Thermostat That Turns Off Heat if Temperature High Limit is Exceeded to Protect Cultures
Uniform Temperature Control Provided

... Full Description >>>

Get a Quick Quote

Call 1-800-745-2710 For Pricing or Information Apply for low financing!

Complete Product Description

The New Brunswick Scientific Innova 4000 Benchtop Incubator Shaker from GMI is used and in excellent condition with the assurance of our GMI Recertified Guarentee.

The New Brunswick Innova 4000 / Innova 4080 Benchtop Incubator Shaker incorporates a triple eccentric counter balanced drive to provide horizontal plane rotary motion in a 0.75 in. (19 mm) circular orbit. A Proportional/Integral (PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of 25-500 RPM. It also provides temperature control over a range of 5°C above ambient to 60°C.; the Innova 4080 high temperature model provides temperature control over a range of 5°C above ambient to 80°C. The internal chamber is 19.75 inches (50.2 cm) wide, 13.25 inches (33.6 cm) above the platform, and 19 inches (48.3 cm) deep.

Standard Features of the New Brunswick Scientific Innova 4000 Refrigerated Benchtop Incubator Shaker

Agitation 25 - 500 rpm, ±1 rpm
Temperature Range: 5°C above ambient (or coolant) to 60°C, and to 80°C in high- temperature Model 4080.
Optional factory-installed cooling coil available for operating at sub-ambient conditions
Uniform Temperature Control provided by large-capacity blower, tightly-constructed chamber, and self-correcting microprocessor feedback control that instantly compensates for changes in temperature
See-Through Lid Provides Complete Visibility minimizing the need to open the chamber. Rapid air circulation produces quick temperature equilibration and recovery, when needed
Added Safety Features include automatic cut-out of shaker when lid is opened to protect operator; and fail-safe thermostat that turns off heat if temperature high limit is exceeded to protect cultures
Interchangeable, Large-Capacity Accessory Platforms, 18" x 18" (46 x 46 cm), accept gel trays, culture tubes and flasks to 2.8 L; snap in place without tools, using optional Quick Change Platform
Optional 5-Port Gassing Manifold enables direct gassing into flasks for anaerobic cultures
Hydraulic arm eases lid opening and closing