Lab Companion Water Baths
Lab Companion Water Baths
Features at a Glance
- Auto-tuning function for exact temp. control.
- Bias function to calibrate temp. difference between display (SV) and actual temp.(PV) easily.
- CLS (Custom Logical Safe) Control System.
- PID microprocessor controller (touch pad type) achieves accurate temp. control.
- Recalibration function is an added advantage giving confidence that temp. measuring sensor is always accurate.
- Timer (Wait On/Off function) can let the unit start and stop automatically. (99hr 59min)
- Supplementary digital heater cutoff function is added for user and unit’s safety.
- Heating element at the bottom of chamber is easily accessible for service/repair.
- An audible alarm and the display indicate a safety feature has been activated.
- Resettable automatic ON-Off function is to check causes of power-failure by user.
- Optional : Handy Cooler Spring Wire Rack Test Tube Rack
| Product Description |  |
|
The Lab Companion Water Bath model BW-05G: has a capacity of 4L-6L and has a temperature range of Amb +5°C - 100°C with an accuracy of +/- 1°C at 50°C and uniformity +/- 0.2°C at 50°C. It dimensions 302 x 438 x 690 mm externally and requires a power source of 230VAC 50/60Hz 3.0A 120VAC 60Hz 5.8A. The unit weighs 10Kg.
The Lab Companion Water Bath model BW-10G has a capacity of 9L - 11L and has a temperature range of Amb +5°C - 100°C with an accuracy of +/- 1°C at 50°C and uniformity +/- 0.2°C at 50°C. It dimensions 410 x 311 x 354 mm externally and requires a power source of 230VAC 50/60Hz 4.3A 120VAC 60Hz 8.3A. The unit weighs 14Kg.
The Lab Companion Water Bath model BW-20G has a capacity of 19L - 21L and has a temperature range of Amb +5°C - 100°C with an accuracy of +/- 1°C at 50°C and uniformity +/- 0.2°C at 50°C. It dimensions 471 x 390 x 374 mm externally and requires a power source of 230VAC 50/60Hz 8.7A 120VAC 60Hz 8.3A. The unit weighs 18Kg.
Key Features
- Auto-tuning function for exact temp. control.
- Bias function to calibrate temp. difference between display (SV) and actual temp.(PV) easily.
- CLS (Custom Logical Safe) Control System.
- PID microprocessor controller (touch pad type) achieves accurate temp. control.
- Recalibration function is an added advantage giving confidence that temp. measuring sensor is always accurate.
- Timer (Wait On/Off function) can let the unit start and stop automatically. (99hr 59min)
- Supplementary digital heater cutoff function is added for user and unit’s safety.
- Heating element at the bottom of chamber is easily accessible for service/repair.
- An audible alarm and the display indicate a safety feature has been activated.
- Resettable automatic ON-Off function is to check causes of power-failure by user.
- Optional : Handy Cooler Spring Wire Rack Test Tube Rack
