Global Medical Instrumentation, Inc.









OPTI-SOLV Reservoir Filter

 
The OPTI-SOLV Solvent Reservoir Filter is the finest filter available for mobile phase filtering. The unique design requires no assembly or fittings for installation, and remains at the bottom of the solvent bottle while allowing unrestricted solvent access.

With OPTI-SOLV, you won't have to force your inlet tubing over a stem or use a fitting to connect it - simply insert the tubing into the TeflonŪ housing until it bottoms out. Of course, you won't even have to do that for a while, because each OPTI-SOLV filter comes complete with PTFE tubing for connection to your pump.


 
 

OPTI-SOLV Solvent reservoir filters help avoid the problem of trapped bubbles. A unique conical internal flowpath assures that all air is readily purged from the filter and housing. OPTI-SOLV Solvent Reservoir Filters are made using PTFE and titanium, and are sold individually and in five-packs.

$ Call for a competitive quotation at
763-712-8717 or at our  Contact Page

 

See Chart Below




OPTI-SOLV™  ANALYTICAL RESERVOIR FILTER FOR 1/16" OD TUBING

PART NUMBER DESCRIPTION PICTURE
10-04-00079 2 micron PIC
10-04-00080 2 micron, 5/Pk -
10-04-00081 10 micron PIC
10-04-00082 10 micron, 5/Pk -

OPTI-SOLV™  ANALYTICAL RESERVOIR FILTER FOR 1/8" OD TUBING

PART NUMBER DESCRIPTION PICTURE
10-04-00047 2 micron -
10-04-00050 2 micron, 5/Pk -
10-04-00051 10 micron PIC
10-04-00053 10 micron, 5/Pk -

OPTI-SOLV™  ANALYTICAL RESERVOIR FILTER FOR 3/16" OD TUBING

PART NUMBER DESCRIPTION PICTURE
10-04-00054 2 micron PIC
10-04-00056 2 micron, 5/Pk -
10-04-00057 10 micron PIC
10-04-00058 10 micron, 5/Pk -

OPTI-SOLV™  SOLVENT RESERVOIR FILTERS WITH TUBE SYSTEM

Optimize Solvent Reservoir Filters with tube stem are made of Hastelloy CŪ for maximum corrosion resistance and inertness. The filter with a 1/8" stem is an improved version of the Waters filter, and is directly interchangeable.

The filter with a 1/16" stem may be used for most other HPLC systems. For extended flow systems where flow rates exceed 10 mL/minutes, a 10 micron filer is required. For most analytical applications, the 2 micron filter is preferable.

OPTI-SOLV™  SOLVENT RESERVOIR FILTERS FOR 1/16" TUBING

PART NUMBER DESCRIPTION PICTURE
10-04-00071 2 micron -
10-04-00072 2 micron, 5/Pk -
10-04-00073 10 micron -
10-04-00074 10 micron, 5/Pk -

OPTI-SOLV™  SOLVENT RESERVOIR FILTERS FOR 1/8" TUBING

PART NUMBER DESCRIPTION PICTURE
10-04-00115 2 micron -
10-04-00119 2 micron, 5/Pk -
10-04-00111 10 micron -
10-04-00114 10 micron, 5/Pk -

 
  Accepting all major credit cards:     At GMI...its instrumental !

  GMI, Inc.
  6511 Bunker Lake Blvd.  
  Ramsey,   Minnesota, 55303   USA
  Tel. 763-712-8717          Fax 763-712-8724 
  Send electronic mail to tom@gmi-inc.com

 



Home Page  |  GMI Catalog  |   Search  |  What's New  |  Ordering  |   Contact  |  Service  |  Contents

General Lab Products  |  Analytical Products  |  Clinical Products  |  Biotech Products  |  Medical Instruments


Copyright Đ 1999 through 2006.  This page and all associated pages (web archived and all other)  (and their HTML) of this website and all content at www.gmi-inc.com are the sole property of Global Medical Instrumentation, Inc. and are protected by GMI copyright protection laws and may not be reproduced in any form nor may any content or any  images be removed without the owner's express written permission. All instruments mentioned on our web site are the trademarks of their respective manufacturer.  GMI, Inc. makes no claims of special affiliation with or special sanctions by the original manufacturers or their respective trademarks. The appearance of those names is not intended to imply that GMI  is an officially authorized dealer or distributor for those manufacturers .   Purchases are subject to GMI Terms and Conditions of Sale found on our Contact and Ordering page.  ***Inventory changes daily, please call for availability and for items not seen or listed.   We look forward to hearing from you!