Lab Companion Jeio Tech Incubator

Lab Companion Floor
Model Shaker Incubators
Models IS-971 & IS-971R

Lab Companion Floor Model 971 Series Shaker Incubator

	Digital PID Microprocessor Controller
	Patented CLS (Custom Logical Safety) System, exceeding DIN Class 2
	Chamber Volume 250L
	Temperature Control Range Ambient+ 5.0 ~ 60.0 C (Refrigerated Type + 4.0C ~ 60.0C)
	Auto Tuning and Bias Function (Internal Sensor Calibration)
	99h 59m Timer with Time Delay ON-OFF
	Door & Over Temperature Alarms
	Shaking amplitude 30, 40, 50, 60 and 70mm (30mm standard)
	RS 232 with FREE LabTracer Software
	10 to 300 rpm Shaking Speed with Opto-Electronic Feedback
	999h 59m Shaking Timer
	Programmable motion - Clockwise, Anti-Clockwise and Pause
	Optional : Flask Clamp, Universal Platform, Spring Wire Rack, Separate Funnel Clamp, Test Tube Rack, Rubber Mat

Accessorization:

The universal platforms provide flexibility for mixing different size test tubes and glassware on a single platform. Available various sizes of clamps for Erlenmeyer flasks and Separating funnels.

Platforms:

If using a single flask size only, the dedicated platforms provide maximum capacity, and come with clamps installed. Provided standard clamp size are 250mL and 500mL, but possibly provide the other size of clamps also.

Funnel Clamps

Test Tube Carriers

Universal Utility Carriers

Several adjustable clamping bars to quickly secure a variety of glassware or tubes utilities on non-skid rubber mat. Suitable for different sizes of flat bottomed flasks

Spring Wire Racks

Ideal for holding a wide variety of tubes, flasks, and other glassware. All component are made of stainless steel

Alternative to flask clamps for securing vessels to a shaker platform. Ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps. Refer to the below maximum RPM for each flask sizes. Sticky pad can be re-generated to like-new condition by washing with mild detergent and water. It cannot be used in water baths. For safe operation, suggest increasing the RPM gradually

Available in three styles. a Tower type holders, two Flat types (small and large) and a Single type. The tower holders will hold 9 standard plates or 3 deep well plates. The large flat holders will hold 4 standard or deep well plates. The small flat holders will hold 3 standard or deep well plates. The single holders will hold only 1 standard or deep well plate.

Lab Companion Brand
Shaker Incubators

Ambient to 60C or refrigerated.

Tired of paying a fortune for a shaker incubator? GMI has been supplying Lab Companion incubators for years to discerning laboratories. These Brand NEW incubators are approximately 25% off the competitions best price. Want reliability? You've got it! Exclusive drive mechanism delivers YEARS and years and years and years and years of dependable service

Advanced incubated shakers for heavy workload and flask up to maximum 4 X 6L!

Your cells will be thrilled with the following specifications:

Temperature Range:
Model IS-971: Ambient +5�C-60�C
Model IS-971R: Ambient +4�C-60�C

Temperature Accuracy: +/- 0.1�C at 38�C
Temperature Uniformity: +/- 0.1�C at 38�C

Shaking Timer: Run time (999hr 59 min 59 sec) Pause, Forward, Backward (Max 59 min 59 sec, Min 10 sec)

Shaking Driving System: Brushless DC motor with feedback control

Temperature Timer: Wait on time,
Wait off time (Max. 99hr 59min, Min. 1 min)

Print Interface: RS232

Dimensions: 1250 x 798 x 1050 mm (external)

Electrical Requirements: 120VAC, 50/60HZ

Power Consumption:
Model IS-971: 4.1A
Model IS-971R: 6.2A

Weight:
Model IS-971: 180 kg
Model IS-971R: 195 kg

$ call for quote based on platform and flask clamps required by your lab

You can place credit card orders
by calling 763-712-8717 or
by completing the form on the
Ordering Page.

Model		IS-971	IS-971R		IS-971RF
Temperature Considerations	Range	Amb. +5℃ to 60℃ (Amb. +9℉ to 140℉) for IS-971 +4℃ to 60℃ (+40℉ to 140℉) for IS-971R, 971RF
	Accuracy	�0.1℃ at 38℃ (�0.18℉ at 100℉)
	Uniformity	�1.0℃ at 38℃ (�1.8℉ at 100℉)
	Refrigerator	-	1/3 LBP (AC 100, 120V)		1/3 LBP (AC 100, 120V)
		-	1/6 HBP (AC 230V)		1/4 HBP (AC 230V)
Shaking system	Motion type	Orbital or Reciprocating motion selectable
	Frequency	10 to 300 rpm
	Timer	Run time: 1 min to 999 hr 59 min Forward & Backward, Pause: 10 sec to 9 min 50 sec
	Orbit size (mm dia.)	30, 40, 50, 60, 70mm dia. (1.2, 1.6, 2.0, 2.4, 2.8� dia.) Available/ Standard - 30mm dia. (1.2� dia.)
	Recip stroke length (mm)	30, 40, 50, 60, 70mm (1.2, 1.6, 2.0, 2.4, 2.8�) Available/ Standard - 30mm (1.2�)
Dimensions	Platform	(W�L) 755�481mm (29.7x18.9�)
	Internal	(W�L�H)/ Volume 894�634�480mm/ 270L (35.2x25.0x18.9�/ 9.5cu ft)
	Overall	(W�L�H) 1250�798�1050mm (49.2x31.4x41.3�)
	Net weight	(396.8lb)	195.0kg (429.9lb)		210.0kg (462.9lb)
Electrical Requirements (230V)		50/60Hz, 5.2A	60Hz, 7.3A	50Hz, 7.3A	60Hz, 8.1A	50Hz, 8.1A
Cat. No.		AAH23306K	AAH23321K	AAH23322K	AAH23351K	AAH23352K
Electrical Requirements (120V)		60Hz, 11.2A	60Hz, 13.8A		60Hz, 15.3A

Accepting all major credit cards:		At GMI...its instrumental !
GMI, Inc. 6511 Bunker Lake Blvd. Ramsey, Minnesota, 55303 USA Tel. 763-712-8717 Fax 763-712-8724 Send electronic mail to richard@gmi-inc.com
Copyright � 1998 - 2006 This page and all associated pages (and their HTML) of this website and all content at www.gmi-inc.com are the sole property of Global Medical Instrumentation, Inc. and are protected by GMI copyright protection laws and may not be reproduced in any form nor may any content or any images be removed without the owner's express written permission. All instruments mentioned on our web site are the trademarks of their respective manufacturer. GMI, Inc. makes no claims of special affiliation with or special sanctions by the original manufacturers or their respective trademarks. The appearance of those names is not intended to imply that GMI is an officially authorized dealer or distributor for those manufacturers . Purchases are subject to GMI Terms and Conditions of Sale found on our Contact and Ordering page. ***Inventory changes daily, please call for availability and for items not seen or listed. We look forward to hearing from you!