You are here: New and Used Lab Equipment General Forma 3110 CO2 Incubator

New and Used Lab Equipment - GMI Inc

Loading
arrow Forma 3110 CO2 Incubator (forma3110)

Forma 3110 CO2 Incubator

Forma 3110 CO2 Incubator

  • Proven Thermo conductivity CO2 regulation
  • Heating Laboratory Incubator
  • Chamber 6.5 Cubic Feet
  • HEPA Filtration System
  • Digital Displays
  • Soft Button Controls
  • Solid Door and Clear Plexiglass Door
... Full Description >>>


Complete Product Description

The Forma claims the Forma 3110 CO2 Incubator is the #1 Selling CO2 Incubator in the World! Whether true or not your choice of a 3110 doesn’t require much debate. The Forma Series II Water Jacketed CO2 Incubator with precise CO2 and O2 control, elevated RH, and a choice of T/C (thermal conductivity) or IR (infrared) sensor is the first choice for many researchers in academic, government, clinical, biotech, and R&D labs. What sets this CO2 incubator apart from others?

HEPA ? !

  • 100% HEPA filtration quickly achieves Class 100 air quality. An optional built-in VOC filtration system
  • removes volatile organic compounds (vapors). The HEPA filter entraps particulate air contaminants
  • and prevents their escape. Filter efficiency increases as particulates and micro-organisms are entrapped.
  • Efficiency and long-term effectiveness of the HEPA Filter Airflow System minimize the need to remove your
  • product for frequent, lengthy decontamination cycles. Incubator down time is diminished.
  • Security of proven water jacket technology.


Think of it as a security blanket. Should the power go out or the ambient temperature swing, the Series II’s triple wall construction holds the temperature better than an air jacket or double wall water jacket design

Proven Water Jacket Technology
Temperature retention and quick recovery are especially important for researchers working with critical cell cultures. Our water jacketed incubator provides maximum thermal protection and quick recovery from swings in ambient temperature and power variations.

 

Forma 3110 CO2 Incubator Specifications

Temperature  
Control +/- 0.1C
Range 5C to Amb
Uniformatity 5C to Amb
Tracking Alarm Programmable High/Low
Safety  
Sensor Precision thermistor
Controller Independent Analog
Setability 0.1C
CO2/02  
CO2/O2 Control Better than +/-0.1 %
CO2 Range 0-20%
O2 Range 0-20%
Inlet Pressure 15 PSIG (1.0 bar)
CO2 Sensor T/C or IR
O2 Ranger Fuel Cell
Readability 0.1%
Tracking Alarm User Programmable High /Log
Humidity  
RH Ambient or 95% @ 37C
Humidity Pan 3.2qt standard
Optional Display In 1% increments
Inlet Pressure  
Maximum per Chamber 40.8 sq ft
Standard Maximum 4,17
Construction  
Water Jacket Volume 11.7 gal
Interior Volume 6.5 cu ft
Interor Type 304, mirror finish, Stainless steel
Exterir 18 gauge , colled-rolled steel, power cord
Outer Door Gasket Four sided mould magnetic vinyl
Interior Door Gasket Removable/ Cleanable, feather edge silicon