ACCELERATION TIME

ACCELERATION TIME of a rotor to its maximum speed varies with the rotor, the centrifuge, and the acceleration program selected by the user.

 

AVERAGE RADIUS

AVERAGE RADIUS of a rotor is the distance from the center of rotation to the midpoint of the centrifuge tube during centrifugation.

 

CENTRIFUGAL FORCE

CENTRIFUGAL FORCE (symbol: g) is exerted on a rotating body or particle, tending to pull it away from the center of rotation.

 

CLEARING

CLEARING is the removal, by sedimentation in a centrifugal field, of particles from a supernatant.

 

CLEARING FACTOR

CLEARING FACTOR (symbol: K) is a constant, different for each rotor, used to compare the relative efficiency of rotors for pelleting operations: K = tS, where t is the clearing time of a specified particle in hours and S is the sedimentation coefficient of that particle in Svedbergs

 

CLEARING TIME

CLEARING TIME is the time required to sediment a particle in aqueous solution to the bottom of a centrifuge tube: t = K/S, where t is the clearing time in hours, K is the clearing factor for a specific rotor, and S is the sedimentation coefficient of the particle in Svedbergs Acceleration and Deceleration times are not taken into effect when total run time is calculated. Run times may be longer for most metallic rotors although their clearing factor may appear to have better sedimenting efficiency than comparable carbon rotors. Carbon Fiber rotors are lighter and accelerate and decelerate faster than metallic rotors...

 

DECELERATION TIME

DECELERATION TIME of a rotor from its maximum speed varies with the rotor, the centrifuge, and the deceleration program selected by the user.

 

DENSITY

DENSITY is the mass per unit volume of a substance, often expressed in g/ml.

 

DENSITY GRADIENT CENTRIFUGATION

DENSITY GRADIENT CENTRIFUGATION is separation performed in a supporting column of solution in which the density and solution concentration increase toward the bottom of the centrifuge tube.

 

DERATION

DERATION of rotors, after a specified amount of use, guards against the effects of metal fatigue.

 

DIFFERENTIAL CENTRIFUGATION

DIFFERENTIAL CENTRIFUGATION separates particles on the basis of their size. By a series of centrifugations at various speeds and times, different-sized particles are sedimented and collected from an initially homogenous suspension.

 

DISCONTINUOUS, OR STEP, GRADIENT

DISCONTINUOUS, OR STEP, GRADIENT is one composed of layers, with abrupt changes in density and/or concentration from one layer to the next.

 

ELC

ELC is Enhanced Liquid Containment. Some models of High/Super Speed rotors have a special lid and curve annulus at the top of the rotor. The annulus is designed to contain a volume of liquid equal to one bottle/tube that leaks from the bottle/tube during cetrifugation, thus eliminating rotor imbalance if the fluid is leaked and escapes from the rotor.

 

EQUILIBRIUM, OR ISOPYCNIC, GRADIENT CENTRIFUGATION

EQUILIBRIUM, OR ISOPYCNIC, GRADIENT CENTRIFUGATION separates particles on the basis of their buoyant densities. A gradient range is selected to encompass the densities of all particles to be banded. Equilibrium gradients may be self-generated by centrifugal force acting on a solution of uniform starting density, or they may be preformed by layering to achieve equilibrium more rapidly.

 

GRADIENT LAYERING

GRADIENT LAYERING is the process of making a preformed discontinuous gradient by means of a mechanical pump or a Pasteur pipette.

 

IMBALANCE (rotor imbalance) : The superiority of carbon fiber rotors:

Carbon fiber rotors are not susceptible to slight imbalances as do metallic rotors, because of their light weight. Carbon fiber rotors also do not elongate at high speeds as do metallic rotors, therefore imbalances of approximately 1% of sample volume per tube in small rotors, and 2.5% to 5% of sample volume per tube in large volume rotors can be tolerated in carbon fiber rotors. The metallic rotors are restricted to imbalance tolerance of 0.5% for small rotors and 2% for large volume rotors. In carbon fiber rotors tubes can be filled at equal levels "by eye" whereas with metallic rotors tubes must be filled and balanced within 0.1 to 2.0 grams per tube according to rotor volumes.

 

ISOPYCNIC GRADIENT CENTRIFUGATION

ISOPYCNIC GRADIENT CENTRIFUGATION. See EQUILIBRIUM GRADIENT CENTRIFUGATION.

 

K-FACTOR.

K-FACTOR. See CLEARING FACTOR

 

MAXIMUM RADIUS

MAXIMUM RADIUS (symbol: rmax) of a rotor is the distance from the center of rotation to the bottom of the centrifuge tube during centrifugation.

 

MINIMUM RADIUS

MINIMUM RADIUS of a rotor is the distance from the center of rotation to the inside (centripetal) top edge of the centrifuge tube during centrifugation

 

MOLECULAR WEIGHT

MOLECULAR WEIGHT (symbol: M) is the sum of the atomic weights of all the atoms in a molecule.

 

NOMINAL TUBE VOLUME

NOMINAL TUBE VOLUME is that which a centrifuge tube would hold if completely filled. The actual fill volume under operating conditions, however, will be somewhat less.

 

OVERSPEED DISK

OVERSPEED DISK is s ring with alternating light and dark sector-shaped stripes that is attached to the bottom of each preparative ultracentrifuge rotor. An essential part of the photoelectric overspeed detection system, it should be replaced if damaged or when the rotor is derated.

 

PELLETING

PELLETING is the process of sedimenting material to the bottom of a centrifuge tube.

 

PELLICLE

PELLICLE is a film or floating layer at the top of a centrifuge tube, following centrifugation.

 

RADIUS

RADIUS (symbol: r) of a rotor is the distance from the center of rotation.

 

RCF

RCF is the symbol for RELATIVE CENTRIFUGAL FIELD.

 

REFRACTIVE INDEX

REFRACTIVE INDEX (symbol: n) is the ratio of the velocity of light (at a particular wavelength) in a vacuum to that in a medium, such as water.

 

RELATIVE CENTRIFUGAL FIELD

RELATIVE CENTRIFUGAL FIELD (symbol: RCF) is the ratio of a centrifugal field, at a specific speed and a specific radius, to the earth's field of gravity: RCF = 1.12 r (RPM/1000)^2 where r is the radius in millimeters and RPM is the speed of rotation in revolutions per minute (rpm)

 

REORIENTATION

REORIENTATION of the solution within a centrifuge tube changes its position in all fixed angle, vertical tube, and near vertical tube rotors. During centrifugation, the solution orients perpendicular to the axis of the rotor; it reorients to its original position after centrifigation.

 

ROTOR CAPACITY

ROTOR CAPACITY is the maximum volume of liquid (both sample and gradient) that a rotor can carry with all tubes full

 

SELF-GENERATING GRADIENT

SELF-GENERATING is one that is generated during centrifugation by resistribution and sedimentation of an initially uniform concentration of the gradient medium and sample solution.

 

SHORT COLUMN METHOD

SHORT COLUMN METHOD is the practice of partially filling centrifuge tubes in order ro reduce the sedimentation pathlength, thereby reducing the run time.

 

SHORT GRADIENT

SHORT GRADIENT is one with a rapid rate of change in density along the gradient column

 

STEP, OR DISCONTINUOIS, GRADIENT

STEP, OR DISCONTINUOIS, GRADIENT is one composed of layers, with abrupt changes in density and/or concentration from one layer to the next.

 

SUPERNATANT

SUPERNATANT is the liquid in a centrifuge tube above a pellet or sediment, after centrifugation.

 

SVEDBERG

SVEDBERG (SYmbol: S) is the unit used to express the sedimentation coefficient, where S = 1 x 10^(-13) seconds

 

TUBE SIZE

TUBE SIZE is the length of a centrifuge tube, often given in both inches and millimeters.

 

TUBE VOLUME

TUBE VOLUME see NORMAL TUBE VOLUME.

 

WEIGHT/VOLUME (Symbol: w/v)

WEIGHT/VOLUME (Symbol: w/v) is the percent concentration of a solute in a solution, by weight per unit volume. For example, 20% w/v = 20 g of solute in 100ml of solution.

 

WEIGHT/WEIGHT (Symbol: w/w)

WEIGHT/WEIGHT (Symbol: w/w) is the percent concentration of a solute in a solution, by weight. For example, 20% w/w = 20 g of solute in 80 g of solution. This concentration is used in density gradient centrifugation.                                                      courtesy of Piramoon Technologies, Inc