|
MS-F1 Laboratory Fermenter
GMI is proud to
carry a compelling laboratory scale fermenter alternative to New
Brunswick, Sartorius, B. Braun, and Applikon. The modular MS-F1 is a
programmable fermentation system with an user friendly interface
design. It is offered as a complete system including all the
necessary accessories. It can equip with single culture vessel or
double jacketed culture vessel for different microbiological
material. Its high reproductibility was proven in many experiments.
There are two modes, manual mode and programmable mode. In addition,
Cascade, and Acid-start condition are also built in the controller.
It has a mode, One Controller- Two Vessel available to save bench
top space.
The MS-F1 is an excellent benchtop
laboratory scale fermenter with full warranty and support from GMI
with superior economics and price point
Bench Top Fermenter
Componentry:
A. Vessel
The
electro-polished 316 stainless steel head and bottom plate
fitted onto the single glass vessel.
10 ports with
fitting for multiple application, such as pH; DO, Temp;
Anti-foam; Sampling; Breeding, etc.
B. Agitation
Top drive
removable motor with real speed measurement.
Single mechanical
seal does not require spare parts or lubrication and
performs excellently under pressure and under vacuum
conditions.
3 ea of the
electro-polished 316 stainless steel impeller.
C. Aeration
The unit is
supplied with a flow meter (rotameter type 0~10 L/min) for
the control of the flow rate of air into the bioreactor.
L-type sparger :
the geometry of the vessel, combined with the right design
of impellers provide the culture with optimal transfer rates
and mixing.
Programmable Microprocessor
Controller
A. 15 steps programmable
temperature controller
PID controller
with 15 programmable steps
Bottom heating
plate combine with cooling valve
Temp range /
accuracy : 0-90 ℃ / ± 0.1 ℃
B. 15 steps programmable
agitation controller
PID controller
with 15 programmable steps
Range : 0~1200
rpm
C. pH controller
1 combined
actoclavable pH probe (in-gold type), with gelled
electrolyte.
Range / accuracy
: pH 2~12 / ± 0.01
D. DO display
Autoclavable
ingold type DO probe
Range : 0~100%
E. Antifoam controller
Stainless steel
probe with electric insulation attached to a port on the
head plate of bioreactor allowing height adjustment.
Delay cyclical
operation automatically controlled by two programmable
timers.
F. Pumping versatility
Four built-in,
programmable pumps can be assigned to more than five
different functions via the keypad. These include addition
of acid, base, chemical deformer and nutrients as well as
the harvesting of culture. Control capability is also
provided for an optional fifth pump.
Adjustable flow
rate for each easy load pump head.
15 programmable
steps for each feeding application.
For a quotation reflecting your
specific configuration and vessel requirements please call
763-712-8717 or complete the form on the
Ordering Page. |
