The
'clock' gives you a visual estimate of progress from the other side
of the lab!
Easy to use software presents
the protocol on one screen. Simply press the parameter you
want to change and change it.
All parameters are programmed in
at the protocol stage for immediate run capability.
NEWS FLASH ! GMI carries brand new in the box thermal cyclers
with superior characteristics to the MJ PTC 200 line!
The FIRST with touch screen control !
ATC201 Thermal Cycler The ATC 201 Thermal Cycler is
a very economical, sub ambient high throughput thermal cycler. The
ATC 201 is provided with a unique CombiBlock which can accommodate
96 x 0.2 ml or 48 x 0.5ml tubes. This Peltier driven device exhibits
the same heating and cooling rates and block uniformity
specification as more expensive models, and temperature can be controlled
using either block or simulated tube control. Easy-to-use
programming is accomplished via the large black and white touch
screen LCD and the spring loaded hot lid ensures excellent sealing
of both 0.2 and 0.5 ml tubes.
Your protocols
are entered using a 5 x 7" touch screen, and with room for 60
protocols you'll have plenty of memory.
The 201
software exceeds all your requirements, and it is very intuitive,
therefore reaching for the manual will be a thing of the past!
Temp Range 4°C to 99° C
No. of
Programs
60
Heating Range Up to 3°C/Sec
Max Program
Stages
5
Cooling Rate Up to 2°C/Sec
Max Steps Per
Stage
5
Uniformity +/- 0.4°C
Gradient
Software
No
Lid Temp 110°C
Max Programmed
Dwell Time 24 hrs
Temp Control Block Control Simulated Tube
Pause Facility
Yes
Dimensions 254 x 30 x 203mm
Adjust Ramp
Rates
No
Weight 9.1kg
Temperature
Increments/ Decrements
No
Warranty 2 years
Time
Increments/Decrements
No
Auto Restart
No
Run 'end-time'
Calculation
Yes
You can order this instrument
by calling 763-712-8717 or by
completing the form on the Ordering Page.
Accepting all
major credit cards:
At
GMI...its instrumental
!
GMI, Inc.
6511 Bunker Lake Blvd.
Ramsey, Minnesota, 55303 USA
Tel. 763-712-8717 Fax
763-712-8724 Send electronic mail to richard@gmi-inc.com
